HardLabs

Anydrive ffb

ANYplays77·anydrive-ffb·anydrive-ffb/PCB/anydrive-ffb/anydrive-ffb.kicad_pcb

Anydrive ffb PCB layout, top view — open source RP2040/RP2350 board by ANYplays77

About the Anydrive ffb PCB

Anydrive ffb is an open source RP2040/RP2350 PCB design by ANYplays77, published on GitHub. It is a 2-layer board measuring 22.9 × 40.6 mm, with 3 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 2 connectors and 1 IC.

From the project

Goal: Design a DIY Force Feedback racing wheel from scratch. Tech: RP2040 microcontroller, custom USB HID/PID low-level protocol, BTS7960 H-bridge driver, 24V high-torque DC motor, and custom belt-and-pulley mechanical reduction system. Duration: 3 weeks (theoretical phase and logging).

Plutôt que d'acheter un simulateur commercial hors de prix, j'ai décidé de relever le défi de tout concevoir moi-même. Mon but avec anyDrive est de prouver qu'avec un bon code, un fer à souder, et de l'impression 3D, on peut rivaliser avec du matériel haut de gamme depuis son propre atelier.

Pour ce projet, je touche à tout : le code bas niveau, l'électronique et la mécanique. Le Cerveau : J'utilise un Seeed Studio XIAO RP2040. C'est lui qui va gérer le protocole natif USB HID/PID pour communiquer avec le jeu sans aucune latence. Mon Électronique : Je designe ma propre carte mère centralisée…

Main components on the Anydrive ffb

XIAO-RP2040-DIP

Anydrive ffb bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
Conn_01x08_Pin
J1
1
Conn_01x06_Pin
J2

Anydrive ffb design files

The KiCad project lives in the ANYplays77/anydrive-ffb repository on GitHub; these links point at the commit this page was built from.

Anydrive ffb: common questions

What microcontroller does the Anydrive ffb use?

The Anydrive ffb is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Anydrive ffb PCB?

The Anydrive ffb measures 22.9 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Anydrive ffb?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Anydrive ffb design files?

From the ANYplays77/anydrive-ffb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Anydrive ffb design in my own project?

The repository has no license, so all rights stay with ANYplays77. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Anydrive ffb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards