Smart-PlantCare-Assistant

AP-123456789·Smart-PlantCare-Assistant·Hardware/Plant care.kicad_pcb

Smart-PlantCare-Assistant PCB layout, top view — open source RP2040/RP2350 board by AP-123456789

About the Smart-PlantCare-Assistant PCB

Smart-PlantCare-Assistant is an open source RP2040/RP2350 PCB design by AP-123456789, published on GitHub. It is a 2-layer board measuring 110.5 × 61.5 mm, with 11 components from 10 distinct parts.

Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 3 connectors, 2 diodes, 2 capacitors, 2 resistors, 1 IC and 1 switch.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

The Smart Plant Care Assistant is a plant-monitoring system built around the Seeed Studio XIAO RP2040 microcontroller. It monitors soil moisture, ambient temperature, and humidity, presenting real-time telemetry on an SSD1306 OLED display with visual status alerts via red and gre

The Smart Plant Care Assistant is a plant-monitoring system built around the Seeed Studio XIAO RP2040 microcontroller. It monitors soil moisture, ambient temperature, and humidity, presenting real-time telemetry on an SSD1306 OLED display with visual status alerts via red and green LEDs. A push-button switch allows seamless navigation between multiple display pages.

Smart-PlantCare-Assistant, from the project README
From the project README

Main components on the Smart-PlantCare-Assistant

Smart-PlantCare-Assistant bill of materials (BOM)

11 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-SMD
U1
1
AHT20_MODULE
J1
1
OLED_SSD1306
J2
1
SOIL_MOISTURE_SENSOR.
J3
1
DISPLAY_BUTTON
SW1
1
RED_LED
D1
1
GREEN_LED
D2
1
100nF
C1
1
10uF
C2
2
220R
R1, R2

Smart-PlantCare-Assistant design files

The KiCad project lives in the AP-123456789/Smart-PlantCare-Assistant repository on GitHub; these links point at the commit this page was built from.

Smart-PlantCare-Assistant: common questions

What microcontroller does the Smart-PlantCare-Assistant use?

The Smart-PlantCare-Assistant is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.

How big is the Smart-PlantCare-Assistant PCB?

The Smart-PlantCare-Assistant measures 110.5 × 61.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart-PlantCare-Assistant?

11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart-PlantCare-Assistant design files?

From the AP-123456789/Smart-PlantCare-Assistant repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart-PlantCare-Assistant design in my own project?

The repository has no license, so all rights stay with AP-123456789. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart-PlantCare-Assistant without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards