APT-V01-FMC
About the APT-V01-FMC PCB
APT-V01-FMC is an open source PCB design by ApotheoTech, published on GitHub. It is a 6-layer board measuring 89.4 × 69 mm, with 126 components from 39 distinct parts.
Other key parts include the M24C64-DRDW8TP/K, DCK0006A_N, Si52131-A11A, TXS0108ERGYR and USB3310C-CP. By type, the board carries 52 resistors, 45 capacitors, 12 ICs, 5 connectors, 5 test points and 3 diodes.
It belongs with the dev boards & breakouts and iot & wireless designs in this gallery.
From the project
GPIO FMC card, Schematics and PCB
The GPIO board is made mostly for enabling GPIO access to any FMC card connector. It has a Raspberry Pi hat compliant connector, and two PMODs that can be used by PMODs that require two adjacent connectors.
It also has an M.2 Key E connector with a ULPI USB 2.0 interface and 1 PCIe TX and RX connection to support Wifi and Bluetooth.
Navigate up to the repository under example designs (TBD link).
Main components on the APT-V01-FMC
APT-V01-FMC bill of materials (BOM)
126 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M24C64-DRDW8TP/K SOP65P640X120-8N | M24C64-DRDW8TP_K | IC1 |
| 1 | DCK0006A_N | SN74AXC1T45DCKR | U1 |
| 1 | Si52131-A11A | Si52131_QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U2 |
| 7 | TXS0108ERGYR | TI_VQFN_RGY0020A | U3, U5, U6, U7, U8, U9, U10 |
| 1 | USB3310C-CP Microchip Technology | Microchip_QFN24_4X4 | U4 |
| 1 | TPSM82902SISR | TPSM82902SISR | U11 |
| 1 | 830105863709 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ECS-2016MV-240-BN-TR3 ECS | ECS-2016MV | Y2 |
| 1 | ASP-134604-01 | ASP13460401 | J1 |
| 1 | 2199119-4 | 2199119-4 | J2 |
| 1 | TSW-120-23-G-D | PinHeader_2x20_P2.54mm_Vertical | J3 |
| 2 | SSQ-106-02-G-D-RA | PMOD | J4, J5 |
| 1 | 9774015151R | 9774015151R | H3 |
| 1 | SYM_ESD_Small | ApotheoTech_Sym | SYM1 |
| 5 | TestPoint | TestPoint | TP1, TP2, TP3, TP4, TP5 |
| 1 | 5988A80107F GRN LED | D_0402_1005Metric | D1 |
| 2 | APT1608SGC | LED_0603_1608Metric | D2, D3 |
| 1 | GRM21BR61E106MA73L 10uF | C_0805_2012Metric | C1 |
| 2 | GRM188R61A106KE69D 10uF | C_0603_1608Metric | C2, C3 |
| 26 | EMK105B7104KV-F 0.1uF | C_0402_1005Metric | C4, C6, C7, C8, C10, C11, C12, C19 +18 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 04025U140FAT2A 14pF | C_0402_1005Metric | C5, C9 |
| 2 | C0402C105Z9VACTU 1uF | C_0402_1005Metric | C13, C15 |
| 2 | 06036D106MAT2A 10uF | C_0603_1608Metric | C14, C16 |
| 2 | C1005X5R0J104K050BA 0.1uF | C_0402_1005Metric | C17, C18 |
| 4 | GRM155R61H104KE14D 0.1uF Murata | C_0402_1005Metric | C21, C22, C23, C25 |
| 1 | C1005X5R1A225K050BC C_2u2_0402 TDK | C_0402_1005Metric | C24 |
| 2 | C2012X5R1V226M125AC 22uF | C_0805_2012Metric | C43, C44 |
| 1 | GRM155R61A102KA01D 1nF | C_0402_1005Metric | C45 |
| 24 | CRCW04024K70FKED 4.7K | R_0402_1005Metric | R1, R6, R13, R15, R16, R19, R20, R21 +16 |
| 9 | CRCW04020000Z0EDHP 0 | R_0402_1005Metric | R2, R4, R5, R7, R8, R9, R10, R17 +1 |
| 3 | CRCW04020000Z0EDHP DNP | R_0402_1005Metric | R3, R11, R12 |
| 4 | CRCW04024K70FKED DNP | R_0402_1005Metric | R14, R36, R50, R54 |
| 5 | ERJ-2RKF1002X 10K | R_0402_1005Metric | R26, R29, R30, R31, R32 |
| 2 | RC0402JR-07220RL 220 | R_0402_1005Metric | R27, R28 |
| 1 | CRCW04028K06FKEDC 8.06k Vishay/Dale | R_0402_1005Metric | R34 |
| 1 | CRCW040210K0FKEDHP R_10k_0402 VISHAY | R_0402_1005Metric | R35 |
| 1 | ERJ-2RKF4022X 40.2k | R_0402_1005Metric | R40 |
| 1 | CRCW0402100KFKEDHP 100k | R_0402_1005Metric | R41 |
| 1 | CRCW040276K8FKED 76.8k | R_0402_1005Metric | R43 |
APT-V01-FMC design files
The KiCad project lives in the ApotheoTech/APT-V01-FMC repository on GitHub; these links point at the commit this page was built from.
- Layoutpi_hat.kicad_pcb
- Schematicpi_hat.kicad_sch
- BOMBOM/Mouser_BOM_APT-V01-FMC_Rev1.xls
APT-V01-FMC: common questions
How big is the APT-V01-FMC PCB?
The APT-V01-FMC measures 89.4 × 69 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the APT-V01-FMC?
126 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the APT-V01-FMC design files?
From the ApotheoTech/APT-V01-FMC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the APT-V01-FMC design in my own project?
The repository has no license, so all rights stay with ApotheoTech. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k