2 open source boards using the USB3310C-CP
Real designs built with the USB3310C-CP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 101 parts
Kria k26-devboard
antmicro
101 partsApache-2.083 APT-V01-FMC
ApotheoTech
89.4 × 69 mm126 parts6LNo license4
The USB3310C-CP in open source designs
The gallery holds 2 open source boards using the USB3310C-CP from 2 GitHub repositories; a typical one measures about 89.4 × 69 mm and carries around 114 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Kria k26-devboard by antmicro.
What boards using the USB3310C-CP are built for
USB3310C-CP: common questions
Where can I find a USB3310C-CP reference design?
Each of the 2 boards on this page is a real design using the USB3310C-CP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the USB3310C-CP?
The median is 89.4 × 69 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB3310C-CP?
By GitHub stars, Kria k26-devboard by antmicro, with 83 stars.
Can I simulate one of these boards using the USB3310C-CP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.