Robomas Controller board
ar216-2355·Robomas_Controller_board
About the Robomas Controller board
Robomas Controller board is an open source STM32 PCB design by ar216-2355, published on GitHub. It is a 2-layer board measuring 97.2 × 60 mm, with 121 components from 36 distinct parts.
Its main chip is the STM32G474CBTX, from the STM32 family. Other key parts include the 74HC595D, LTV-817S, XC6206PXXXMR, 74HC165D and TCAN1044VDDFRQ1. By type, the board carries 35 resistors, 30 capacitors, 19 diodes, 16 connectors, 10 switches and 9 ICs.
From the project
stm32 cube ide の G474robomascontroller パッケージ と合わせて使う想定

Main components on the Robomas Controller board
Robomas Controller board bill of materials (BOM)
121 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HC595D | SOIC127P600X175-16N | IC1, IC2 |
| 1 | STM32G474CBTX STM32G474CBTx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LTV-817S | SMDIP-4_W9.53mm | U2 |
| 1 | XC6206PXXXMR XC6206PxxxMR | SOT-23-3 | U3 |
| 1 | 74HC165D | SOIC127P600X175-16N | U4 |
| 3 | TCAN1044VDDFRQ1 | SOT65P280X110-8N | U5, U6, U7 |
| 3 | RJ45_LED_SHIELDED RJ45_LED_Shielded | RJ45_LAN_port | J1, J2, J3 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J5 |
| 2 | CONN_01X02_SOCKET Conn_01x02_Socket | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6, J16 |
| 5 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J7, J8, J9, J10, J15 |
| 1 | 10155435-00011LF | AMPHENOL_10155435-00011LF | J11 |
| 3 | CONN_01X02_PIN Conn_01x02_Pin | JST_BM02B-GHS-TBT_LF__SN_ | J12, J13, J14 |
| 1 | Polyfuse | Fuse_0805_2012Metric | F1 |
| 1 | SW_Push | SW_TS-1187A-B-A-B | SW1 |
| 8 | SW_Push | SW_TS-1088-AR02016 | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 1 | RotaryEncoder | rotary_encoder | SW10 |
| 17 | Yellow | LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 +9 |
| 1 | Red | LED_0603_1608Metric | D17 |
| 1 | Green | LED_0805_2012Metric | D18 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FerriteBead_Small | C_0603_1608Metric | FB1 |
| 22 | 100N 100n | C_0402_1005Metric | C1, C2, C3, C4, C7, C11, C13, C14 +14 |
| 4 | 1u | C_0402_1005Metric | C5, C8, C9, C10 |
| 1 | 4.7U 4.7u | C_0402_1005Metric | C6 |
| 1 | 1n | C_0402_1005Metric | C12 |
| 2 | 10N 10n | C_0402_1005Metric | C28, C29 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 4 | 1.5K 1.5k | R_0402_1005Metric | R3, R6, R7, R8 |
| 1 | 0 | R_0402_1005Metric | R4 |
| 2 | 10K 10k | R_0402_1005Metric | R5, R28 |
| 19 | 1k | R_0402_1005Metric | R9, R10, R11, R12, R13, R14, R15, R16 +11 |
| 3 | 120 | R_0402_1005Metric | R25, R26, R27 |
| 1 | 20K 20k | R_0402_1005Metric | R29 |
| 1 | 470K 470k | R_0402_1005Metric | R33 |
| 1 | 470 | R_0402_1005Metric | R34 |
| 1 | 100 | R_0402_1005Metric | R35 |
Robomas Controller board design files
The KiCad project lives in the ar216-2355/Robomas_Controller_board repository on GitHub; these links point at the commit this page was built from.
Robomas Controller board: common questions
What microcontroller does the Robomas Controller board use?
The Robomas Controller board is built around the STM32G474CBTX, from the STM32 family.
How big is the Robomas Controller board?
The Robomas Controller board measures 97.2 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Robomas Controller board?
121 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Robomas Controller board design files?
From the ar216-2355/Robomas_Controller_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Robomas Controller board design in my own project?
The repository has no license, so all rights stay with ar216-2355. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robomas Controller board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k