5 open source boards using the 74HC165D

Real designs built with the 74HC165D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74HC165D

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC165D connects to, and the resistors, capacitors and other passives placed on it.

  • The ~Q7 pin is left unconnected on 4 of 5 designs.
  • The ~CE pin is tied to GND on 4 of 5 designs.
  • The D0 pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ.
  • The D1 pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ.
~Q7pin 7Connected to: Not connected 80% · a signal 20%
GNDpin 8Connected to: GND 100%
DSpin 10Connected to: Not connected 60% · GND 20% · a signal 20%
D0pin 11Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
D1pin 12Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
D2pin 13Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
D3pin 14Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
~CEpin 15Connected to: GND 80% · a signal 20%
VCCpin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 40% · 100 nF (2)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include JoyMIDI-HW by bcc6, TEC0117-01-game board by FrankBuss, Robomas Controller board by ar216-2355 and 74HController by Greentalinjo.

The 74HC165D in open source designs

The gallery holds 5 open source boards using the 74HC165D from 5 GitHub repositories; a typical one measures about 136 × 76.9 mm and carries around 131 components.

60% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is JoyMIDI-HW by bcc6.

Parts used alongside the 74HC165D

Microcontrollers on boards using the 74HC165D

What boards using the 74HC165D are built for

74HC165D: common questions

Where can I find a 74HC165D reference design?

Each of the 5 boards on this page is a real design using the 74HC165D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC165D ~Q7 pin connected?

The ~Q7 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC165D.

How is the 74HC165D ~CE pin connected?

The ~CE pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC165D.

What pull-up resistor is used on the 74HC165D D0 pin?

The D0 pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the 74HC165D.

Which microcontrollers do boards using the 74HC165D use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the 74HC165D?

The median is 136 × 76.9 mm, and 60% are two-layer designs.

What is the most popular open source board using the 74HC165D?

By GitHub stars, JoyMIDI-HW by bcc6, with 2 stars.

Can I simulate one of these boards using the 74HC165D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part