Bionix
Araadh3111·Bionix·circuit design/Peak.kicad_sch
About the Bionix PCB
Bionix is an open source RP2040/RP2350 PCB design by Araadh3111, published on GitHub. It is a board, with 9 components from 4 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 1 module and 1 battery holder.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
A really cool bionic hand (my first project btw)!!!
An open-source, EMG-controlled bionic hand engineered for the IRIS National Science Fair. Bionix features a custom tendon-driven mechanical design, frictionless brass-rod joints, and an antagonistic elastic return system.
├── CAD/ # Fusion 360 models, assemblies, and STL files for 3D printing
├── circuit design/ # KiCad schematics (Peak.kicad_sch) for power and signal routing
Main components on the Bionix
Bionix bill of materials (BOM)
9 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | Battery | BT1 | |
| 1 | Conn_01x04 | BuckConverter1 | |
| 6 | Conn_01x03 | Myoware1, Servo1, Servo2, Servo3, Servo4, Servo5 |
Bionix design files
The KiCad project lives in the Araadh3111/Bionix repository on GitHub; these links point at the commit this page was built from.
- Schematiccircuit design/Peak.kicad_sch
- BOMBOM.csv
Bionix: common questions
What microcontroller does the Bionix use?
The Bionix is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How many components are on the Bionix?
9 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bionix design files?
From the Araadh3111/Bionix repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Bionix design in my own project?
The repository has no license, so all rights stay with Araadh3111. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bionix without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k