Ir demo board
aranya-project·ir-demo-board
About the Ir demo board
Ir demo board is an open source PCB design by aranya-project, published on GitHub. It is a 2-layer board measuring 35.6 × 58.4 mm, with 28 components from 10 distinct parts.
Other key parts include the Vishay TFBS4711 and Adafruit 5477. By type, the board carries 14 resistors, 7 capacitors, 3 ICs, 3 connectors and 1 module.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
FeatherWing carrier for the IR Demo
This is a carrier board for an Adafruit Feather device, designed specifically for the ESP32-S3 Feather. It breaks out two UARTs into IR transceivers, and SPI to a microSD slot.
There are three sets of components for the IR transceivers, but only two can be used. The sections marked IR1 are shared, connected to UART1, and only one section needs to be populated. The section marked IR2 is connected to UART2.

Main components on the Ir demo board
Ir demo board bill of materials (BOM)
28 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | Vishay TFBS4711 TFBS4711 | TFBS4711 | U1, U2, U3 |
| 1 | Adafruit 5477 Adafruit_Feather_ESP32-S3 | Adafruit_Feather | A1 |
| 1 | - EXT A | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | - EXT B | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | SameSky MSD-4-A Micro SD | MSD-4-A | J3 |
| 4 | C0805C105Z4VACTU 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C7 |
| 3 | CL21A475KOFNNNE 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C6 |
| 3 | WR08X470 JTL 47 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6 |
| 3 | WR08X100 JTL 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R13 |
| 8 | RMCF0805FT47K0 47K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R8, R9, R10, R11, R12, R14 |
Ir demo board design files
The KiCad project lives in the aranya-project/ir-demo-board repository on GitHub; these links point at the commit this page was built from.
- LayoutIR Demo FeatherWing.kicad_pcb
- SchematicIR Demo FeatherWing.kicad_sch
- BOMbom.csv
Ir demo board: common questions
How big is the Ir demo board?
The Ir demo board measures 35.6 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ir demo board?
28 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ir demo board design files?
From the aranya-project/ir-demo-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ir demo board design in my own project?
The repository has no license, so all rights stay with aranya-project. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k