Project-WALLE

ArathBV·Project-WALLE·Hardware/WALLE_PCB/Wall_E_motherboard.kicad_pcb

Project-WALLE PCB layout, top view — open source STM32 board by ArathBV

About the Project-WALLE PCB

Project-WALLE is an open source STM32 PCB design by ArathBV, published on GitHub. It is a 4-layer board measuring 69 × 69 mm, with 80 components from 37 distinct parts.

Its main chip is the STM32F411RCTx, from the STM32 family. Other key parts include the LM1085-ADJ, DRV8838, BNO055 and TPS561243DRLR. By type, the board carries 28 capacitors, 21 resistors, 6 ICs, 3 crystals, 3 switches and 3 diodes.

From the project

This repository contains ME 507 Quarter term project WALLE. Created by Arath Villanueva and Devon Bolt. California Polytechnic State University San Luis Obispo Spring Quarter 2025.

Main components on the Project-WALLE

Project-WALLE bill of materials (BOM)

80 components, 37 distinct parts.

QtyPartRefs
1
LM1085-ADJ
U1
1
STM32F411RCTx
U2
2
DRV8838
U3, U7
1
BNO055
U6
1
TPS561243DRLR
U8
1
SI4435FDY-T1-GE3
Q1
1
25MHz
Y1
2
32.768kHz
Y2, Y3
1
Conn_01x02
J1
4
Conn_01x03_Socket
ArmL1, ArmR1, HandL1, HandR1
1
Conn_01x08_Socket
Camera1
1
Fuse
F1
2
Conn_01x04_Socket
IMU1, Range1
2
Conn_01x06_Socket
LeftMotor1, RightMotor1
1
Conn_01x06_Socket
STLink1
2
SW_SPST
SW1, SW2
1
SW_SPST
SW3
1
Conn_01x02_Socket
UART1
3
LED
D1, D2, D3
1
10uH
L1
Show 17 more
QtyPartRefs
1
IFDC5050HZER270M
L2
1
10u
C1
5
22u
C2, C9, C11, C27, C29
1
4.7u
C3
2
4.3p
C4, C5
2
12p
C6, C7
14
0.1u
C8, C10, C12, C13, C16, C17, C18, C19 +6
2
22p
C21, C22
1
2.2u
C26
1
16.5k 1%
R1
2
10k 1%
R2, R13
3
60
R3, R4, R15
10
10k
R5, R6, R7, R8, R9, R11, R14, R17 +2
1
100k
R10
1
73.2k 1%
R12
1
5k
R16
2
2.2k
R18, R19

Project-WALLE design files

The KiCad project lives in the ArathBV/Project-WALLE repository on GitHub; these links point at the commit this page was built from.

Project-WALLE: common questions

What microcontroller does the Project-WALLE use?

The Project-WALLE is built around the STM32F411RCTx, from the STM32 family.

How big is the Project-WALLE PCB?

The Project-WALLE measures 69 × 69 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Project-WALLE?

80 components, from 37 distinct parts. The full bill of materials is listed on this page.

Where can I download the Project-WALLE design files?

From the ArathBV/Project-WALLE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Project-WALLE design in my own project?

The repository has no license, so all rights stay with ArathBV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Project-WALLE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards