7 open source boards using the STM32F411RCTx

Real designs built with the STM32F411RCTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32F411RCTx

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32F411RCTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
  • The VDD pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF).
  • The VCAP1 pin has a capacitor to GND on 7 of 7 designs, most often 2.2 µF (then 4.7 µF).
  • The PH0 pin has a crystal on 6 of 7 designs, most often 25 MHz (then 8 MHz).
VBATpin 1Connected to: 3.3V 71% · not connected 29%
  • Decoupling capacitor on 57% · 100 nF (8)
PH0pin 5Connected to: Signal 86%
  • Crystal on 86% · 25 MHz (4), 8 MHz (2)
  • Capacitor to GND on 86% · 18 pF (3), 4.3 pF (2), 16 pF (1)
PH1pin 6Connected to: Signal 86%
  • Crystal on 86% · 25 MHz (4), 8 MHz (2)
  • Capacitor to GND on 86% · 18 pF (3), 4.3 pF (2), 16 pF (1)
NRSTpin 7Connected to: A connector 57% · not connected 29%
  • Capacitor to GND on 71% · 100 nF (5)
  • Pull-up to 3.3V on 43% · 10 kΩ (3)
VSSApin 12Connected to: GND 100%
VDDApin 13Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 100% · 100 nF (8), 1 µF (3), 4.7 µF (1)
VSSpin 18, 31, 47, 63Connected to: GND 100%
VDDpin 19, 32, 48, 64Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (35), 4.7 µF (2), 1 µF (1)
VCAP1pin 30Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (5), 4.7 µF (4)
PD2pin 54Connected to: Not connected 86%
PB6pin 58Connected to: A connector 57%, BNO055 29%
  • Pull-up to 3.3V on 43% · 2.2 kΩ (2), 2.7 kΩ (1)
BOOT0pin 60Connected to: Signal 100%
  • Resistor to GND on 71% · 10 kΩ (5)

46 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vectrex cart by rattboi, VEXTREME-VXCOOP by jonskiv, ME-507-Mechanical-Control-System-Design by ArathBV and Project-WALLE by ArathBV.

The STM32F411RCTx in open source designs

The gallery holds 7 open source boards using the STM32F411RCTx from 7 GitHub repositories; a typical one measures about 69 × 69 mm and carries around 78 components.

57% use four copper layers or more, and 43% carry an open source license.

The most starred is Vectrex cart by rattboi.

Microcontrollers on boards using the STM32F411RCTx

STM32F411RCTx: common questions

Where can I find a STM32F411RCTx reference design?

Each of the 7 boards on this page is a real design using the STM32F411RCTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F411RCTx VDDA pin?

The VDDA pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F411RCTx.

What decoupling capacitors do designs use on the STM32F411RCTx VDD pin?

The VDD pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F411RCTx.

How is the STM32F411RCTx VCAP1 pin connected?

The VCAP1 pin has a capacitor to GND on 7 of 7 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F411RCTx.

What parts are used alongside the STM32F411RCTx?

The 74HC32, BNO055, DRV8838, LM1085-ADJ and LM1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the STM32F411RCTx use?

Most are built on STM32 (6) and ESP8266 (1).

How big is a typical board using the STM32F411RCTx?

The median is 69 × 69 mm, and 43% are two-layer designs.

What is the most popular open source board using the STM32F411RCTx?

By GitHub stars, Vectrex cart by rattboi, with 15 stars.

Can I simulate one of these boards using the STM32F411RCTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part