10 open source boards using the DRV8838
Real designs built with the DRV8838, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Romi unified board advanced
WPIRoboticsEngineering
125.1 × 125.7 mm91 parts4LNo license1STM32
Roamer bot
kylestew
111.8 × 69.8 mm61 parts4LNo license1STM32
Project-WALLE
ArathBV
69 × 69 mm80 parts4LNo license0STM32
ME-507-Mechanical-Control-System-Design
ArathBV
69 × 69 mm78 parts4LNo license0STM32
Floppy-Ant-Controller
paolo-dgz
22.8 × 33.3 mm60 parts2LCERN-OHL-S-2.00STM32
Mercury v2
Teruru-52
72.8 × 100 mm147 parts2LNo license1Romi unified board-2layer
WPIRoboticsEngineering
125.1 × 125.7 mm71 parts4LNo license1DriverModule
cpeniche
100.6 × 67.1 mm69 parts4LNo license0Romi unified board
WPIRoboticsEngineering
125.1 × 125.7 mm68 parts4LNo license1Romi unified board-2layer-PRE
WPIRoboticsEngineering
125.1 × 125.7 mm68 parts4LNo license1
How designs wire the DRV8838
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the DRV8838 connects to, and the resistors, capacitors and other passives placed on it.
- The VM pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 22 µF).
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VMpin 1 | Connected to: BATT 100% |
|
| GNDpin 4, 9 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Roamer bot by kylestew, Mercury v2-pcb by Teruru-52, Romi unified board by WPIRoboticsEngineering and ME-507-Mechanical-Control-System-Design by ArathBV.
The DRV8838 in open source designs
The gallery holds 10 open source boards using the DRV8838 from 7 GitHub repositories; a typical one measures about 106.2 × 84.9 mm and carries around 70 components.
80% use four copper layers or more, and 10% carry an open source license.
The most starred is Mercury v2-pcb by Teruru-52.
Parts used alongside the DRV8838
Microcontrollers on boards using the DRV8838
What boards using the DRV8838 are built for
DRV8838: common questions
Where can I find a DRV8838 reference design?
Each of the 10 boards on this page is a real design using the DRV8838. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the DRV8838 VM pin?
The VM pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 7 open source designs using the DRV8838.
What decoupling capacitors do designs use on the DRV8838 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the DRV8838.
What parts are used alongside the DRV8838?
The BNO055, LM1085-ADJ, STM32F411RCTx and TPS561243DRLR appear in the most repositories here.
Which microcontrollers do boards using the DRV8838 use?
Most are built on STM32 (5) and Microchip SAM (1).
How big is a typical board using the DRV8838?
The median is 106.2 × 84.9 mm, and 20% are two-layer designs.
What is the most popular open source board using the DRV8838?
By GitHub stars, Mercury v2-pcb by Teruru-52, with 1 stars.
Can I simulate one of these boards using the DRV8838 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.