AD2S1210
arcoslab·open-coroco-legacy·src_PCB/AD2S1210_05_05_14/AD2S1210.kicad_pcb
About the AD2S1210 PCB
AD2S1210 is an open source PCB design by arcoslab, published on GitHub. It is a 2-layer board measuring 30.7 × 7.4 mm, with 29 components from 15 distinct parts.
By type, the board carries 13 capacitors, 11 resistors, 1 transistor and 1 connector.
It belongs with the robotics & motion designs in this gallery.
From the project
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a STM32F4 microcontroller using bldc motors and strain gauges.
AD2S1210 bill of materials (BOM)
29 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RECOM | SIP-3 | Q1 |
| 1 | CONN_25X2 | PIN_ARRAY_STM32_25X2 | P1 |
| 1 | AD2S1210 | LQFP48 | AD1 |
| 2 | OPA561 | tssop-20 | OP1, OP2 |
| 5 | 10n | c_0805 | C2, C3, C5, C9, C18 |
| 2 | 20p | c_0805 | C4, C8 |
| 1 | 4.7µ | c_0805 | C10 |
| 1 | 2.2µ | c_0805 | C11 |
| 2 | 120p | c_0805 | C12, C13 |
| 2 | 100n | c_0805 | C16, C17 |
| 1 | 1k | c_0805 | R1 |
| 2 | 15.4k | c_0805 | R2, R3 |
| 4 | 10k | c_0805 | R4, R5, R9, R11 |
| 2 | 390k | c_0805 | R6, R7 |
| 2 | 22k | c_0805 | R8, R10 |
AD2S1210 design files
The KiCad project lives in the arcoslab/open-coroco-legacy repository on GitHub; these links point at the commit this page was built from.
AD2S1210: common questions
How big is the AD2S1210 PCB?
The AD2S1210 measures 30.7 × 7.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AD2S1210?
29 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AD2S1210 design files?
From the arcoslab/open-coroco-legacy repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the AD2S1210 design in my own project?
The repository has no license, so all rights stay with arcoslab. Use it as a reference, and ask the author before reusing the design.
More boards in open-coroco-legacy
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979