AD2S1210 AD8662-append
About the AD2S1210 AD8662-append PCB
AD2S1210 AD8662-append is an open source PCB design by arcoslab, published on GitHub. It is a 2-layer board measuring 31.8 × 19.1 mm, with 74 components from 39 distinct parts.
Other key parts include the AD8662. By type, the board carries 27 resistors, 21 capacitors, 5 transistors, 5 connectors, 5 diodes and 3 relays.
It belongs with the robotics & motion designs in this gallery.
From the project
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a STM32F4 microcontroller using bldc motors and strain gauges.
Main components on the AD2S1210 AD8662-append
AD2S1210 AD8662-append bill of materials (BOM)
74 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8662 | MSOP_8 | IC1 |
| 1 | RECOM | SIP-3 | Q1 |
| 2 | BC846 | SOT23 | Q2, Q4 |
| 2 | BC856 | SOT23 | Q3, Q5 |
| 1 | 8.192 MHZ | crystal_ATS | X1 |
| 3 | CONN_1 | SIL-1 | P1, P2, P3 |
| 1 | JP_2 | pin_array_3x2 | P4 |
| 1 | JP_3 | pin_array_3x2 | P5 |
| 1 | AD2S1210 | LQFP48 | AD1 |
| 1 | Drill1 | drill_4mm | Drill1 |
| 1 | Drill2 | drill_4mm | Drill2 |
| 1 | Drill3 | drill_4mm | Drill3 |
| 1 | Drill4 | drill_4mm | Drill4 |
| 1 | FUSE | SM1812E | F1 |
| 1 | JP_1 | PIN_ARRAY_3X1 | K1 |
| 1 | V_control | PIN_ARRAY_3X1 | K2 |
| 1 | Power | power_jack | K3 |
| 4 | DIODE | SM0805 | D1, D2, D3, D4 |
| 1 | DIODE | SM1206 | D5 |
| 3 | 4.7µ | SM1206 | C1, C7, C10 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10n | SM0805 | C2, C3, C5, C9, C18 |
| 2 | 20p | SM0805 | C4, C8 |
| 4 | 10µ | SM1206 | C6, C15, C20, C21 |
| 1 | 2.2µ | SM0805 | C11 |
| 2 | 120p | SM0805 | C12, C13 |
| 1 | 220µ | Elko_vert_DM10_RM5_CopperClear | C14 |
| 3 | 100n | SM0805 | C16, C17, C19 |
| 1 | 10K | R1 | R1 |
| 1 | 1K | R1 | R2 |
| 1 | 3,3K | R1 | R3 |
| 4 | 10k | SM0805 | R4, R6, R18, R20 |
| 2 | 22k | SM0805 | R5, R19 |
| 4 | 3.3k | SM0805 | R7, R8, R15, R16 |
| 3 | 2.2k | SM0805 | R9, R14, R21 |
| 4 | 4.7k | SM0805 | R10, R11, R12, R13 |
| 2 | 13.6k | SM0805 | R17, R27 |
| 2 | 0k | SM0805 | R22, R23 |
| 2 | 15.4k | SM0805 | R24, R26 |
| 1 | 8.66k | SM0805 | R25 |
AD2S1210 AD8662-append design files
The KiCad project lives in the arcoslab/open-coroco-legacy repository on GitHub; these links point at the commit this page was built from.
AD2S1210 AD8662-append: common questions
How big is the AD2S1210 AD8662-append PCB?
The AD2S1210 AD8662-append measures 31.8 × 19.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AD2S1210 AD8662-append?
74 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AD2S1210 AD8662-append design files?
From the arcoslab/open-coroco-legacy repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the AD2S1210 AD8662-append design in my own project?
The repository has no license, so all rights stay with arcoslab. Use it as a reference, and ask the author before reusing the design.
More boards in open-coroco-legacy
Similar boards
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Rp2040 encoder
Twisted-Fields
36.7 × 33.3 mm10 parts2LCustom license417
VESC Controller
paltatech
160 × 90 mm908 parts2LNo license354
${BOARD NAME} Assembly
EPFLXplore
45 × 43.5 mm21 parts4LApache-2.0345
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243
Legacy stepper motor analyzer
zapta
96.7 × 66.4 mm28 parts2LCC0-1.0163