Carte d'extension Nucleo-64
AREM-Projets·Robot-CdR-2025·PCB/Extension_nucleo/nucleo_expansion.kicad_pcb
About the Carte d'extension Nucleo-64 PCB
Carte d'extension Nucleo-64 is an open source PCB design by AREM-Projets, published on GitHub. It is a 2-layer board measuring 93 × 94 mm, with 9 components from 9 distinct parts.
Other key parts include the NUCLEO-F446RE. By type, the board carries 8 connectors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
Repo contenant l'ensemble des documents liés au robot de la coupe de France de Robotique 2025
PCB Alimentation PCB Shield STM32 Embase
Main components on the Carte d'extension Nucleo-64
Carte d'extension Nucleo-64 bill of materials (BOM)
9 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NUCLEO-F446RE | MODULE_NUCLEO-F446RE | U1 |
| 1 | SPI2_slave1 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | SPI2_slave2 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | UART3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | PWM2/1 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | PWM4/2 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | PWM1/2N | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | PWM1/3N | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | PWM8/2N | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
Carte d'extension Nucleo-64 design files
The KiCad project lives in the AREM-Projets/Robot-CdR-2025 repository on GitHub; these links point at the commit this page was built from.
Carte d'extension Nucleo-64: common questions
How big is the Carte d'extension Nucleo-64 PCB?
The Carte d'extension Nucleo-64 measures 93 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte d'extension Nucleo-64?
9 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte d'extension Nucleo-64 design files?
From the AREM-Projets/Robot-CdR-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Carte d'extension Nucleo-64 design in my own project?
The repository has no license, so all rights stay with AREM-Projets. Use it as a reference, and ask the author before reusing the design.
More boards in Robot-CdR-2025
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979