Carte d'alimentation 2024
AREM-Projets·Robot-CdR-2025·PCB/Alim-5V/power_supply_5V.kicad_pcb
About the Carte d'alimentation 2024 PCB
Carte d'alimentation 2024 is an open source PCB design by AREM-Projets, published on GitHub. It is a 2-layer board measuring 102.2 × 71.3 mm, with 21 components from 9 distinct parts.
By type, the board carries 13 connectors, 3 ICs, 1 fuse, 1 diode and 1 resistor.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Repo contenant l'ensemble des documents liés au robot de la coupe de France de Robotique 2025
PCB Alimentation PCB Shield STM32 Embase
Carte d'alimentation 2024 bill of materials (BOM)
21 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ~ | HW_411 | U1, U2, U3 |
| 2 | Conn_Jack | BarrelJack_Horizontal | J1, J11 |
| 8 | Conn_JST_XH_2_pins | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3, J4, J5, J12, J14, J16, J17, J18 |
| 1 | Conn_01x02_Pin | AMASS_XT60PW-M | J6 |
| 2 | Conn_01x02_Pin | BarrelJack_Horizontal | J8, J13 |
| 2 | Conn_01x01 | PinHeader_1x01_P1.00mm_Vertical | 5,1V, 24V |
| 1 | Fuse | Fuse_BelFuse_0ZRE0100FF_L18.7mm_W5.1mm | F1 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | R | R_Box_L14.0mm_W5.0mm_P9.00mm | R1 |
Carte d'alimentation 2024 design files
The KiCad project lives in the AREM-Projets/Robot-CdR-2025 repository on GitHub; these links point at the commit this page was built from.
Carte d'alimentation 2024: common questions
How big is the Carte d'alimentation 2024 PCB?
The Carte d'alimentation 2024 measures 102.2 × 71.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Carte d'alimentation 2024?
21 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carte d'alimentation 2024 design files?
From the AREM-Projets/Robot-CdR-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Carte d'alimentation 2024 design in my own project?
The repository has no license, so all rights stay with AREM-Projets. Use it as a reference, and ask the author before reusing the design.
More boards in Robot-CdR-2025
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k