HardLabs

Stm32 prototype

ArgonautGit·kicad-projects·stm32_prototype/stm32_prototype.kicad_pcb

Stm32 prototype PCB layout, top view — open source STM32 board by ArgonautGit

About the Stm32 prototype PCB

Stm32 prototype is an open source STM32 PCB design by ArgonautGit, published on GitHub. It is a 2-layer board measuring 31 × 26 mm, with 12 components from 9 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the MCP1700-3302E_TO92. By type, the board carries 5 capacitors, 3 connectors, 2 ICs and 1 switch.

From the project

Just some Kicad projects I've worked on over the years. Most are unfinished or don't work well.

Main components on the Stm32 prototype

STM32F103C8TxMCP1700-3302E_TO92

Stm32 prototype bill of materials (BOM)

12 components, 9 distinct parts.

QtyPartRefs
1
STM32F103C8Tx
U1
1
MCP1700-3302E_TO92
U2
1
2x3_Header
J1
1
Conn_01x04
J2
1
Conn_01x08
J3
1
1uF
JU1
1
sw
SW1
2
0.1uF
C1, C3
3
1uF
C2, C4, C5

Stm32 prototype design files

The KiCad project lives in the ArgonautGit/kicad-projects repository on GitHub; these links point at the commit this page was built from.

Stm32 prototype: common questions

What microcontroller does the Stm32 prototype use?

The Stm32 prototype is built around the STM32F103C8Tx, from the STM32 family.

How big is the Stm32 prototype PCB?

The Stm32 prototype measures 31 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32 prototype?

12 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32 prototype design files?

From the ArgonautGit/kicad-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stm32 prototype design in my own project?

The repository has no license, so all rights stay with ArgonautGit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32 prototype without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in kicad-projects

Similar boards