Ithowifi 4l v21 tht
About the Ithowifi 4l v21 tht PCB
Ithowifi 4l v21 tht is an open source ESP32 PCB design by arjenhiemstra, published on GitHub. It is a 4-layer board measuring 42.3 × 51.5 mm, with 31 components from 22 distinct parts.
Its main chip is the C82899, from the ESP32 family. Other key parts include the CC1101-868MHz-Module and C2692194. By type, the board carries 10 resistors, 5 connectors, 5 capacitors, 3 ICs, 2 transistors and 2 switches.
It belongs with the rf & radio designs in this gallery.
Main components on the Ithowifi 4l v21 tht
Ithowifi 4l v21 tht bill of materials (BOM)
31 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C82899 ESP32-WROOM | ESP32-WROOM-32E | U1 |
| 1 | CC1101-868MHz-Module | CC1101-868MHz-Module | U2 |
| 1 | C2692194 R-78E3.3-0.5 | Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 2 | C78284 BSS138 | SOT-23W | Q1, Q2 |
| 1 | C3294460 CONN_01X07 | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | C3975149 conn | PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | J3 |
| 1 | TC2030-MCP-NL | TC2020-MCP-NL | J4 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | MountingHole_Pad | Pin_D1.0mm_L10.0mm | H1 |
| 1 | C318884 Fail safe | TS-1187 | SW1 |
| 1 | C318884 Reset | TS-1187 | SW2 |
| 1 | C84256 WIFI status | LED_0805_2012Metric | LED1 |
| 1 | C84256 itho status | LED_0805_2012Metric | LED2 |
| 1 | C8598 D_Schottky | D_SOD-123 | D2 |
| 1 | C28323 1uF | C_0805_2012Metric | C2 |
| 2 | C15850 10uF | C_0805_2012Metric | C3, C6 |
| 1 | C7229 470uF | CP_EIA-7343-31_Kemet-D | C4 |
| 1 | C49678 0.1uF | C_0805_2012Metric | C5 |
| 7 | C17414 R10K | R_0805_2012Metric | R1, R2, R3, R4, R7, R8, R10 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C17408 R100 | R_0805_2012Metric | R5, R9 |
| 1 | C17513 R1K | R_0805_2012Metric | R11 |
Ithowifi 4l v21 tht design files
The KiCad project lives in the arjenhiemstra/ithowifi_hardware repository on GitHub; these links point at the commit this page was built from.
Ithowifi 4l v21 tht: common questions
What microcontroller does the Ithowifi 4l v21 tht use?
The Ithowifi 4l v21 tht is built around the C82899, from the ESP32 family.
How big is the Ithowifi 4l v21 tht PCB?
The Ithowifi 4l v21 tht measures 42.3 × 51.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ithowifi 4l v21 tht?
31 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ithowifi 4l v21 tht design files?
From the arjenhiemstra/ithowifi_hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ithowifi 4l v21 tht design in my own project?
The repository has no license, so all rights stay with arjenhiemstra. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ithowifi 4l v21 tht without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ithowifi_hardware
ESP32Ithowifi 4l
63.1 × 49.8 mm42 parts4LNo license2
ESP32Ithowifi
42.3 × 45.1 mm29 parts2LNo license2
Itho rv sensor
30.5 × 31.5 mm8 parts2LNo license2
Panel
24.5 × 42.1 mm7 parts2LNo license2
Hru300 adapter pcn
34.5 × 34 mm5 parts2LNo license2
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k