PNCATEHO MK DOSE
About the PNCATEHO MK DOSE PCB
PNCATEHO MK DOSE is an open source PCB design by aroum, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 95 × 57 mm, with 43 components from 9 distinct parts.
Other key parts include the ProMicro_r. By type, the board carries 23 diodes, 10 switches, 3 resistors, 1 IC and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
РИСАТЕНО (RISATENO) is a 10 key chord keyboard.
The modern era of PNCATEHO development. It differs from the Stone era in that it supports hot-swappable keys and ChocV1/V2, MK Dose, and MX switches. It also uses closed cases and a new design approach by turtle_bazon.
An updated version of the PCB by turtle_bazon. It retains the core features of the Stone era, while adding support for Choc V2, as well as hot-swappable switches, an enclosed case, and a PCB with a more refined design.
Main components on the PNCATEHO MK DOSE
PNCATEHO MK DOSE bill of materials (BOM)
43 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro_r | ProMicro_duplex_mirrored | U1 |
| 1 | TestPoint_2Pole | battery_conn_duplex | J1 |
| 3 | Hole | Hole | H1, H2, H3 |
| 1 | ~ | bsi10h | PSW1 |
| 1 | SW_PUSH | SW_3x4x2_2legs_duplex | RSW1 |
| 10 | ~ | MK-DOSE | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 20 | 1N4148W | D3_SMD | D1, D2, D3, D4, D5, D6, D7, D8 +12 |
| 3 | LED | 0603-led_dual | D21, D22, D23 |
| 3 | R | 0603-resistor_dual | R1, R2, R3 |
PNCATEHO MK DOSE design files
The KiCad project lives in the aroum/PNCATEHO repository on GitHub; these links point at the commit this page was built from.
PNCATEHO MK DOSE: common questions
How big is the PNCATEHO MK DOSE PCB?
The PNCATEHO MK DOSE measures 95 × 57 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PNCATEHO MK DOSE?
43 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PNCATEHO MK DOSE design files?
From the aroum/PNCATEHO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PNCATEHO MK DOSE design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which aroum chose for the repository.
More boards in PNCATEHO
RP2040/RP2350PNCATEHO Welcome
85.6 × 54 mm58 parts2LCERN-OHL-P-2.063
PNCATEHO MK DOSE 100x100
95 × 97 mm43 parts2LCERN-OHL-P-2.063
PNCATEHO v0.5.1
97 × 100 mm27 parts2LCERN-OHL-P-2.063
PNCATEHO v0.5.2
97 × 59 mm27 parts2LCERN-OHL-P-2.063
PNCATEHO 100x100
3.3 × 2.9 mm27 parts2LCERN-OHL-P-2.063
Enki 42 left
93.5 × 54.2 mm10 parts2LCERN-OHL-P-2.063
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k