Quiver PT3 FC
About the Quiver PT3 FC PCB
Quiver PT3 FC is an open source PCB design by Arrow-air, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 70 × 60 mm, with 51 components from 13 distinct parts.
By type, the board carries 14 capacitors, 12 resistors, 8 LEDs, 3 connectors, 3 fuses and 3 diodes.
From the project
Project Quiver documentation, designs, and project artifacts.
Quiver PT3 FC bill of materials (BOM)
51 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AXK5S00347YG | AXK5S00347YG_AXK5S00347YG | J1 |
| 2 | AXK5S00047YG | AXK5S00047YG | J2, J3 |
| 3 | NANOSMDC035F-2 | NANOSMDC016F2 | F1, F2, F3 |
| 8 | NFM21PC104R1E3D | NFM21PC104R1E3D | FL1, FL2, FL3, FL4, FL5, FL6, FL7, FL8 |
| 8 | APT2012LVBC/D APT2012LVBC_D | LEDC2012X85N | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 2 | SMDJ5.0CA | DIONM7959X262N | D1, D2 |
| 1 | DFLS240L-7 | DFLS240L7 | D3 |
| 1 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 9 | 10uF, 10V, 0805 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C8, C9, C10, C11, C12, C13 +1 |
| 4 | 47UF 47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6 |
| 4 | 22R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 6 | 1K2 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R10, R12 |
| 2 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11 |
Quiver PT3 FC design files
The KiCad project lives in the Arrow-air/project-quiver repository on GitHub; these links point at the commit this page was built from.
Quiver PT3 FC: common questions
How big is the Quiver PT3 FC PCB?
The Quiver PT3 FC measures 70 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Quiver PT3 FC?
51 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Quiver PT3 FC design files?
From the Arrow-air/project-quiver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Quiver PT3 FC design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Arrow-air chose for the repository.
