ModuCard backplane
ArthorH·ModuCard-backplane·PCB source/ModuCard-System-ActiveBackplane.kicad_pcb
About the ModuCard backplane PCB
ModuCard backplane is an open source PCB design by ArthorH, published on GitHub. It is a 2-layer board measuring 360.4 × 128.7 mm, with 66 components from 13 distinct parts.
Other key parts include the CH334R. By type, the board carries 24 capacitors, 16 connectors, 11 resistors, 5 ICs, 5 crystals and 3 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
Modular electronics system for mobile robots
Main components on the ModuCard backplane
ModuCard backplane bill of materials (BOM)
66 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | CH334R | QSOP-16_3.9x4.9mm_P0.635mm | U1, U2, U3, U4, U5 |
| 5 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2, Y3, Y4, Y5 |
| 16 | 09031967921 | DIN41612_R_3x32_Male_Vertical_THT | J1, J2, J3, J4, J5, J6, J7, J8 +8 |
| 2 | SW_DIP_x02 | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | SW1, SW2 |
| 3 | RED | D_0402_1005Metric | D1, D2, D3 |
| 10 | 10uF | C_0603_1608Metric | C1, C3, C5, C7, C9, C11, C13, C15 +2 |
| 5 | 1μF | C_0603_1608Metric | C2, C6, C10, C14, C18 |
| 5 | 100nF | C_0603_1608Metric | C4, C8, C12, C16, C20 |
| 4 | 10nF | C_0402_1005Metric | C21, C22, C23, C24 |
| 1 | 2K2 | R_0402_1005Metric | R1 |
| 1 | 1K2 | R_0402_1005Metric | R2 |
| 1 | 680R | R_0402_1005Metric | R3 |
| 8 | 60R | R_0402_1005Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
ModuCard backplane design files
The KiCad project lives in the ArthorH/ModuCard-backplane repository on GitHub; these links point at the commit this page was built from.
ModuCard backplane: common questions
How big is the ModuCard backplane PCB?
The ModuCard backplane measures 360.4 × 128.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ModuCard backplane?
66 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the ModuCard backplane design files?
From the ArthorH/ModuCard-backplane repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ModuCard backplane design in my own project?
The repository has no license, so all rights stay with ArthorH. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979