HardLabs

Noname 2

ARTS-Laboratory·SEC-DAQ·versions/v0.9.0/2 board SEC DAQ/Single_board_DAQ/v0_1d/PCB layout/noname_2.kicad_pcb

Noname 2 PCB layout, top view — open source AVR/Arduino board by ARTS-Laboratory

About the Noname 2 PCB

Noname 2 is an open source AVR/Arduino PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 63.5 × 55.9 mm, with 32 components from 18 distinct parts.

Its main chip is the arduino_half_moonX24, from the AVR/Arduino family. Other key parts include the EL3H7 and FDC1004custom. By type, the board carries 8 resistors, 7 connectors, 7 capacitors, 2 ICs and 1 inductor.

It belongs with the sensors designs in this gallery.

From the project

A 4-channel, 100 pF capacitance DAQ with active shielding designed for Soft Elastomeric Capacitor (SEC) sensors.

Main components on the Noname 2

EL3H7FDC1004custom

Noname 2 bill of materials (BOM)

32 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
EL3H7
U1
1
FDC1004custom
U2
1
CONN_01X02
P1
2
CONN_01X12
P2, P6
1
CONN_01X10
P3
2
CONN_01X01
P4, P5
1
arduino_half_moonX24
P7
2
4k7
RI2C1, RI2C2
3
DIPS_02
S_Channel1, S_Range1, S_Sample1
2
DIPS_01
S_Ground1, S_Trigger1
1
1uH
L1
2
1uF
C1, C6
2
0.1uF
C2, C7
1
100uF
C3
1
51pF
C4
1
10uF
C5
1
0k1
R1
7
10k
R2, R3, R4, R5, R6, R7, R8

Noname 2 design files

The KiCad project lives in the ARTS-Laboratory/SEC-DAQ repository on GitHub; these links point at the commit this page was built from.

Noname 2: common questions

What microcontroller does the Noname 2 use?

The Noname 2 is built around the arduino_half_moonX24, from the AVR/Arduino family.

How big is the Noname 2 PCB?

The Noname 2 measures 63.5 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Noname 2?

32 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Noname 2 design files?

From the ARTS-Laboratory/SEC-DAQ repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Noname 2 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.

Can I test firmware for the Noname 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in SEC-DAQ

Similar boards