Shield v0.9.2
About the Shield v0.9.2
Shield v0.9.2 is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 71.5 × 50.3 mm, with 32 components from 18 distinct parts.
Other key parts include the EL3H7 and FDC1004custom. By type, the board carries 8 resistors, 7 capacitors, 6 connectors, 2 ICs and 1 inductor.
It belongs with the sensors and dev boards & breakouts designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
A 4-channel, 100 pF capacitance DAQ with active shielding designed for Soft Elastomeric Capacitor (SEC) sensors.
Main components on the Shield v0.9.2
Shield v0.9.2 bill of materials (BOM)
32 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EL3H7 | EL3H7 | U1 |
| 1 | FDC1004custom | SOIC_10_FDC1004 | U2 |
| 2 | Conn_01x15 | PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 1 | CONN_01X02 | PinHeader_1x02_P2.54mm_Vertical | P1 |
| 1 | CONN_01X10 | DSUB-9_surface_mount | P3 |
| 2 | CONN_01X01 | GNDA_Pad_4.064mm | P4, P5 |
| 1 | TEST_1P | TestPoint_THTPad_D3.0mm_Drill1.5mm | GND1 |
| 2 | 4k7 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | RI2C1, RI2C2 |
| 3 | DIPS_02 | SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm | S_Channel1, S_Range1, S_Sample1 |
| 2 | DIPS_01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | S_Ground1, S_Trigger1 |
| 1 | 1uH | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | L1 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6 |
| 2 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7 |
| 1 | 100uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 51pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 0k1 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 7 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5, R6, R7, R8 |
Shield v0.9.2 design files
The KiCad project lives in the ARTS-Laboratory/SEC-DAQ repository on GitHub; these links point at the commit this page was built from.
Shield v0.9.2: common questions
How big is the Shield v0.9.2?
The Shield v0.9.2 measures 71.5 × 50.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shield v0.9.2?
32 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Shield v0.9.2 design files?
From the ARTS-Laboratory/SEC-DAQ repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Shield v0.9.2 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.
More boards in SEC-DAQ
Earlier revisions in the repo: shield
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k