HardLabs

CAPSTONE sensor unitV0 4 4

ARTS-Laboratory·Sensor-Package-Access-Hub·system_development/V0.2.0/Sensor Package & Waystation Contents/Working One Way Data Transmission/PCB Design/V0.5.0/CAPSTONE_sensor_unitV0_4_4.kicad_pcb

CAPSTONE sensor unitV0 4 4 PCB layout, top view — open source NXP board by ARTS-Laboratory
Simulate this board

About the CAPSTONE sensor unitV0 4 4 PCB

CAPSTONE sensor unitV0 4 4 is an open source NXP PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 62.2 × 35.6 mm, with 9 components from 8 distinct parts.

Its main chip is the Teensy4.0-teensy-ARTS-Lab, from the NXP family. Other key parts include the nRF24L01+-ARTS-Lab, 5V LVR, 3.3V LVR and MPU6050_Module. By type, the board carries 4 ICs, 2 capacitors, 1 module and 1 battery holder.

It belongs with the sensors designs in this gallery, and the repository also holds 2 earlier revisions of it.

From the project

An access hub for communicating with the lab's sensor packages over short-range RF

Adjusted hole size for MPU6050 Added surface mounts for linear regulators

* New version in March 2025 for future changes.

Main components on the CAPSTONE sensor unitV0 4 4

Teensy4.0-teensy-ARTS-LabnRF24L01+-ARTS-Lab5V LVR3.3V LVRMPU6050_Module

CAPSTONE sensor unitV0 4 4 bill of materials (BOM)

9 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Teensy4.0-teensy-ARTS-Lab
U1
1
nRF24L01+-ARTS-Lab
U2
1
5V LVR
U3
1
3.3V LVR
U4
1
MPU6050_Module
A1
1
Battery
BT1
1
microSD_small-ARTS-Lab
Micro_SD1
2
C_Small
C1, C2

CAPSTONE sensor unitV0 4 4 design files

The KiCad project lives in the ARTS-Laboratory/Sensor-Package-Access-Hub repository on GitHub; these links point at the commit this page was built from.

CAPSTONE sensor unitV0 4 4: common questions

What microcontroller does the CAPSTONE sensor unitV0 4 4 use?

The CAPSTONE sensor unitV0 4 4 is built around the Teensy4.0-teensy-ARTS-Lab, from the NXP family.

How big is the CAPSTONE sensor unitV0 4 4 PCB?

The CAPSTONE sensor unitV0 4 4 measures 62.2 × 35.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CAPSTONE sensor unitV0 4 4?

9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CAPSTONE sensor unitV0 4 4 design files?

From the ARTS-Laboratory/Sensor-Package-Access-Hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CAPSTONE sensor unitV0 4 4 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.

Can I test firmware for the CAPSTONE sensor unitV0 4 4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Sensor-Package-Access-Hub

Earlier revisions in the repo: CAPSTONE_sensor_unitV0_4_1, CAPSTONE_sensor_unitV0_4

Similar boards