Base circuit 2024
About the Base circuit 2024 PCB
Base circuit 2024 is an open source STM32 PCB design by ArunCH404, published on GitHub. It is a 2-layer board measuring 175.3 × 166.2 mm, with 112 components from 15 distinct parts.
Its main chip is the STM32F407_Discovery, from the STM32 family. By type, the board carries 38 connectors, 28 capacitors, 25 resistors, 16 diodes, 2 ICs and 2 switches.
From the project
ABU_Robocon_2024 necessary circuits
Main components on the Base circuit 2024
Base circuit 2024 bill of materials (BOM)
112 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F407_Discovery | STM32F407_Discovery | U1 |
| 1 | ~ | bluepill | U3 |
| 1 | Conn_01x05_Pin | JST_5_BIG | J1 |
| 21 | Conn_01x04_Pin | jst_4 | J3, J4, J5, J6, J7, J8, J9, J10 +13 |
| 6 | Conn_01x05_Pin | jst_1x05 | J16, J20, J21, J26, J28, J30 |
| 4 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J18, J25, J42, J43 |
| 6 | Conn_01x03_Pin | jst_1x03 | J23, J24, J29, J36, J37, J39 |
| 1 | Fuse | Fuse_Holder | F1 |
| 1 | SW_Push | Push_Button | SW1 |
| 1 | SW_Push_Dual | Push_Button | SW5 |
| 16 | LED | LED_D3.0mm | D1, D2, D5, D6, D7, D8, D9, D10 +8 |
| 1 | C | Capacitor_10uF | 10uF1 |
| 26 | C | Capacitor_Disc_Small | 100nF1, 100nF2, 100nF4, 100nF5, 100nF7, 100nF8, 100nF10, 100nF11 +18 |
| 1 | C | Capacitor_100uF | 100uF1 |
| 25 | R | Resistor_small | R1, R4, R5, R6, R7, R8, R9, R10 +17 |
Base circuit 2024 design files
The KiCad project lives in the ArunCH404/ABU_ROBOCON_2024_CIRCUITS repository on GitHub; these links point at the commit this page was built from.
Base circuit 2024: common questions
What microcontroller does the Base circuit 2024 use?
The Base circuit 2024 is built around the STM32F407_Discovery, from the STM32 family.
How big is the Base circuit 2024 PCB?
The Base circuit 2024 measures 175.3 × 166.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Base circuit 2024?
112 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Base circuit 2024 design files?
From the ArunCH404/ABU_ROBOCON_2024_CIRCUITS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Base circuit 2024 design in my own project?
The repository has no license, so all rights stay with ArunCH404. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Base circuit 2024 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ABU_ROBOCON_2024_CIRCUITS
STM32Common circuit
179.1 × 171.5 mm41 parts2LNo license0
Blupill ir n
79.5 × 62.2 mm31 parts2LNo license0
Powercircuitabu2023
137 × 65.8 mm21 parts2LNo license0
Blue pill pinout
46.4 × 62.7 mm13 parts2LNo license0
RP2040/RP2350Imu pico
64.5 × 71.6 mm7 parts2LNo license0
ESP32Imu bn008
56.6 × 56.4 mm7 parts2LNo license0
Optocoupler
33.3 × 28.7 mm7 parts2LNo license0
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k