Imu bn008
About the Imu bn008 PCB
Imu bn008 is an open source ESP32 PCB design by ArunCH404, published on GitHub. It is a 2-layer board measuring 56.6 × 56.4 mm, with 7 components from 7 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the BNO08X. By type, the board carries 2 ICs, 2 connectors, 1 diode, 1 capacitor and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
ABU_Robocon_2024 necessary circuits
Main components on the Imu bn008
Imu bn008 bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | BNO08X | BNO08X | U2 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | jst_4 | J3 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | C | Capacitor_Disc_Small | C1 |
| 1 | R | Resistor_small | R1 |
Imu bn008 design files
The KiCad project lives in the ArunCH404/ABU_ROBOCON_2024_CIRCUITS repository on GitHub; these links point at the commit this page was built from.
- Layoutimu_bno08/imu_bn008.kicad_pcb
- Schematicimu_bno08/imu_bn008.kicad_sch
Imu bn008: common questions
What microcontroller does the Imu bn008 use?
The Imu bn008 is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Imu bn008 PCB?
The Imu bn008 measures 56.6 × 56.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Imu bn008?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Imu bn008 design files?
From the ArunCH404/ABU_ROBOCON_2024_CIRCUITS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Imu bn008 design in my own project?
The repository has no license, so all rights stay with ArunCH404. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Imu bn008 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ABU_ROBOCON_2024_CIRCUITS
STM32Base circuit 2024
175.3 × 166.2 mm112 parts2LNo license0
STM32Common circuit
179.1 × 171.5 mm41 parts2LNo license0
Blupill ir n
79.5 × 62.2 mm31 parts2LNo license0
Powercircuitabu2023
137 × 65.8 mm21 parts2LNo license0
Blue pill pinout
46.4 × 62.7 mm13 parts2LNo license0
RP2040/RP2350Imu pico
64.5 × 71.6 mm7 parts2LNo license0
Optocoupler
33.3 × 28.7 mm7 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k