Optocoupler
About the Optocoupler PCB
Optocoupler is an open source PCB design by ArunCH404, published on GitHub. It is a 2-layer board measuring 33.3 × 28.7 mm, with 7 components from 4 distinct parts.
Other key parts include the NSL-32. By type, the board carries 3 ICs, 3 connectors and 1 resistor.
From the project
ABU_Robocon_2024 necessary circuits
Main components on the Optocoupler
Optocoupler bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NSL-32 | U | U1, U2, U3 |
| 2 | Conn_01x04_Male | jst_4 | J1, J2 |
| 1 | Conn_01x02_Male | bornier2 | J3 |
| 1 | R | Resistor_small | 220R |
Optocoupler design files
The KiCad project lives in the ArunCH404/ABU_ROBOCON_2024_CIRCUITS repository on GitHub; these links point at the commit this page was built from.
Optocoupler: common questions
How big is the Optocoupler PCB?
The Optocoupler measures 33.3 × 28.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Optocoupler?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Optocoupler design files?
From the ArunCH404/ABU_ROBOCON_2024_CIRCUITS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Optocoupler design in my own project?
The repository has no license, so all rights stay with ArunCH404. Use it as a reference, and ask the author before reusing the design.
More boards in ABU_ROBOCON_2024_CIRCUITS
STM32Base circuit 2024
175.3 × 166.2 mm112 parts2LNo license0
STM32Common circuit
179.1 × 171.5 mm41 parts2LNo license0
Blupill ir n
79.5 × 62.2 mm31 parts2LNo license0
Powercircuitabu2023
137 × 65.8 mm21 parts2LNo license0
Blue pill pinout
46.4 × 62.7 mm13 parts2LNo license0
RP2040/RP2350Imu pico
64.5 × 71.6 mm7 parts2LNo license0
ESP32Imu bn008
56.6 × 56.4 mm7 parts2LNo license0