Ares-Controller
aryanscodingden·Ares-Controller·PCB Files/GameController.kicad_pcb
About the Ares-Controller PCB
Ares-Controller is an open source ESP32 PCB design by aryanscodingden, published on GitHub. It is a 2-layer board measuring 146 × 89 mm, with 19 components from 19 distinct parts.
Its main chip is the ESP32_30pin, from the ESP32 family. By type, the board carries 13 switches, 4 connectors, 1 IC and 1 diode.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
A custom ESP32 powered game controller!
This project was built because I always wanted to own a controller & decided to build one instead. It was indeed a very intersting journey to build one of my own, started to appricate the small QOL of other products. (P.S. This is my first ever hardware project)
The firmware is written in C++ and will be edited/deployed from Arduino IDE.
Ares-Controller bill of materials (BOM)
19 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ESP32_30pin | U1 |
| 1 | Joystick_L | PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x06 For TP4056 | TP4056-Module | J2 |
| 1 | Joystick_R | PinHeader_1x05_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x02 For Battery | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BTN A | SW_VS-1213-67-160GF | SW1 |
| 1 | BTN B | SW_VS-1213-67-160GF | SW2 |
| 1 | BTN X | SW_VS-1213-67-160GF | SW3 |
| 1 | BTN Y | SW_VS-1213-67-160GF | SW4 |
| 1 | L1 | SW_Tactile_SKHH_Angled | SW5 |
| 1 | R1 | SW_Tactile_SKHH_Angled | SW6 |
| 1 | BTN START | SW_VS-1213-67-160GF | SW8 |
| 1 | BTN HOME | SW_VS-1213-67-160GF | SW9 |
| 1 | DPAD U | SW_VS-1213-67-160GF | SW10 |
| 1 | DPAD D | SW_VS-1213-67-160GF | SW11 |
| 1 | DPAD L | SW_VS-1213-67-160GF | SW12 |
| 1 | DPAD R | SW_VS-1213-67-160GF | SW13 |
| 1 | SW_SPST | PinHeader_1x02_P2.54mm_Vertical | SW15 |
| 1 | LED | LED_D5.0mm_Horizontal_O6.35mm_Z3.0mm | D1 |
Ares-Controller design files
The KiCad project lives in the aryanscodingden/Ares-Controller repository on GitHub; these links point at the commit this page was built from.
Ares-Controller: common questions
What microcontroller does the Ares-Controller use?
The Ares-Controller is built around the ESP32_30pin, from the ESP32 family.
How big is the Ares-Controller PCB?
The Ares-Controller measures 146 × 89 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ares-Controller?
19 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ares-Controller design files?
From the aryanscodingden/Ares-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ares-Controller design in my own project?
The repository has no license, so all rights stay with aryanscodingden. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ares-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k