ThrottleControllerMainRev
About the ThrottleControllerMainRev PCB
ThrottleControllerMainRev is an open source AVR/Arduino PCB design by asfarley, published on GitHub. It is a 2-layer board measuring 45.3 × 46 mm, with 43 components from 24 distinct parts.
Its main chip is the ATmega32U4-M, from the AVR/Arduino family. Other key parts include the TPD4E02B04DQA. By type, the board carries 16 capacitors, 10 resistors, 6 connectors, 3 ICs, 2 diodes and 2 inductors.
Main components on the ThrottleControllerMainRev
ThrottleControllerMainRev bill of materials (BOM)
43 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | SOIC127P600X172-8N | U1 |
| 1 | TPD4E02B04DQA | USON-10_2.5x1.0mm_P0.5mm | U2 |
| 1 | ATmega32U4-M | QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U4 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 2 | Conn_01x02_Socket | JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J3, J5 |
| 1 | Conn_01x04_Pin | JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical | J4 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | P1 |
| 1 | 5A | Fuse_1206_3216Metric | F1 |
| 1 | SW_Push | SW_SPST_B3U-1000P-B | SW1 |
| 1 | ESD9B5.0ST5G | D_SOD-923 | D1 |
| 1 | D_Schottky | D_SOD-123 | D2 |
| 1 | 120R | L_0603_1608Metric | FB1 |
| 1 | FerriteBead_Small | L_0603_1608Metric | FB2 |
| 9 | 100n | C_0603_1608Metric | C1, C2, C5, C6, C7, C11, C12, C13 +1 |
| 3 | 10u | C_0603_1608Metric | C3, C4, C8 |
| 2 | 22p | C_0402_1005Metric | C9, C10 |
| 2 | 0.1u | C_0603_1608Metric | C17, C18 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10k | R_0603_1608Metric | R1, R2, R7, R8 |
| 2 | 22R | R_0603_1608Metric | R3, R4 |
| 2 | 5.1k | R_0603_1608Metric | R5, R6 |
| 2 | 1k | R_0603_1608Metric | R9, R10 |
ThrottleControllerMainRev design files
The KiCad project lives in the asfarley/ThrottleController repository on GitHub; these links point at the commit this page was built from.
ThrottleControllerMainRev: common questions
What microcontroller does the ThrottleControllerMainRev use?
The ThrottleControllerMainRev is built around the ATmega32U4-M, from the AVR/Arduino family.
How big is the ThrottleControllerMainRev PCB?
The ThrottleControllerMainRev measures 45.3 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ThrottleControllerMainRev?
43 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the ThrottleControllerMainRev design files?
From the asfarley/ThrottleController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ThrottleControllerMainRev design in my own project?
The repository has no license, so all rights stay with asfarley. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ThrottleControllerMainRev without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in ThrottleController
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k