Manual gpio board v2

asinghani·18224-tapeout-s23-bringup·pcb/manual_gpio_board_v2/manual_gpio_board_v2.kicad_pcb

Manual gpio board v2 layout, top view — open source board by asinghani

About the Manual gpio board v2

Manual gpio board v2 is an open source PCB design by asinghani, published on GitHub. It is a 4-layer board measuring 81.3 × 52.7 mm, with 49 components from 14 distinct parts.

Other key parts include the 74LVC2G14. By type, the board carries 15 resistors, 14 switches, 12 diodes, 3 jumpers, 2 connectors and 2 capacitors.

From the project

PCB layouts for student project bringup for CMU Open Source Chip Design Spring 2023 tapeout

If you have picked up your kit from ECE, please see BRINGUP.md for instructions on how to get started using it!

If you are interested in the process to assemble the boards/kits, see ASSEMBLY.md

- Breakout Board v1 Schematic - Buttons/Switches Board Schematic - Debugger Board Schematic

Main components on the Manual gpio board v2

Manual gpio board v2 bill of materials (BOM)

49 components, 14 distinct parts.

QtyPartRefs
1
74LVC2G14
U2
1
GPIO_HDR
J1
1
BREAKOUT_HDR
J3
1
RST_JMP
JP1
1
DBG_JMP
JP3
1
CLK_JMP
JP4
12
SS12F44G4
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4
1
BTN_RST
SW13
1
BTN_CLK
SW14
12
LED
D1, D2, D3, D4, D5, D6, D7, D8 +4
2
1u
C5, C6
12
1K
R1, R2, R3, R4, R5, R6, R7, R8 +4
2
10K
R15, R16
1
330R
R17

Manual gpio board v2 design files

The KiCad project lives in the asinghani/18224-tapeout-s23-bringup repository on GitHub; these links point at the commit this page was built from.

Manual gpio board v2: common questions

How big is the Manual gpio board v2?

The Manual gpio board v2 measures 81.3 × 52.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Manual gpio board v2?

49 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Manual gpio board v2 design files?

From the asinghani/18224-tapeout-s23-bringup repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Manual gpio board v2 design in my own project?

The repository has no license, so all rights stay with asinghani. Use it as a reference, and ask the author before reusing the design.

More boards in 18224-tapeout-s23-bringup

Earlier revisions in the repo: manual_gpio_board