Debugger board v1

asinghani·18224-tapeout-s23-bringup·pcb/tempdebug/debugger_board_v1.kicad_pcb

Debugger board v1 layout, top view — open source Microchip SAM board by asinghani

About the Debugger board v1

Debugger board v1 is an open source Microchip SAM PCB design by asinghani, published on GitHub. It is a 4-layer board measuring 81.3 × 43.2 mm, with 53 components from 16 distinct parts.

Its main chip is the ATSAMD21G18A-A, from the Microchip SAM family. Other key parts include the AZ1117-3.3. By type, the board carries 16 resistors, 14 diodes, 14 capacitors, 4 connectors, 2 ICs and 1 crystal.

It belongs with the usb & debug tools designs in this gallery.

From the project

PCB layouts for student project bringup for CMU Open Source Chip Design Spring 2023 tapeout

If you have picked up your kit from ECE, please see BRINGUP.md for instructions on how to get started using it!

If you are interested in the process to assemble the boards/kits, see ASSEMBLY.md

- Breakout Board v1 Schematic - Buttons/Switches Board Schematic - Debugger Board Schematic

Main components on the Debugger board v1

Debugger board v1 bill of materials (BOM)

53 components, 16 distinct parts.

QtyPartRefs
1
ATSAMD21G18A-A
U101
1
AZ1117-3.3
U102
1
32.768KHz
Y101
1
TC2050
J101
1
GPIO_HDR
J102
1
BREAKOUT_HDR
J103
1
USB_C_Receptacle_USB2.0
J104
1
500mA
F101
1
RST_BTN
SW101
14
LED
D101, D102, D103, D104, D105, D106, D107, D108 +6
2
22p
C101, C102
5
0.1u
C103, C105, C107, C108, C109
4
1u
C104, C106, C111, C114
3
10u
C110, C112, C113
14
1K
R101, R102, R103, R104, R105, R106, R107, R108 +6
2
5.1K
R115, R116

Debugger board v1 design files

The KiCad project lives in the asinghani/18224-tapeout-s23-bringup repository on GitHub; these links point at the commit this page was built from.

Debugger board v1: common questions

What microcontroller does the Debugger board v1 use?

The Debugger board v1 is built around the ATSAMD21G18A-A, from the Microchip SAM family.

How big is the Debugger board v1?

The Debugger board v1 measures 81.3 × 43.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Debugger board v1?

53 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Debugger board v1 design files?

From the asinghani/18224-tapeout-s23-bringup repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Debugger board v1 design in my own project?

The repository has no license, so all rights stay with asinghani. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Debugger board v1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in 18224-tapeout-s23-bringup

Similar boards