HardLabs

ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL

AtlasFPGA·ESP32-ATLAS·FINAL_VERSION_NOOPAMP/RECOLOCADOR_ESP32_DEV_KIT_V1_VERSIONFINAL.kicad_pcb

ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL PCB layout, top view — open source ESP32 board by AtlasFPGA

About the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL PCB

ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL is an open source ESP32 PCB design by AtlasFPGA, published on GitHub. It is a 2-layer board measuring 62.7 × 64 mm, with 16 components from 10 distinct parts.

Its main chip is the ESP32-b, from the ESP32 family. By type, the board carries 11 connectors, 4 jumpers and 1 switch.

From the project

Diseño en desarrollo para el ESP32 DEV KIT V1 usado de forma básica con sus 25 señales, como nota usando también un VGA64.

ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL bill of materials (BOM)

16 components, 10 distinct parts.

QtyPartRefs
2
Conn_01x14
J1, J4
1
Conn_01x03
J2
2
Conn_01x04
J3, J7
1
ESP32-b
J5
3
Conn_01x06
J6, J8, J9
1
ESP32-a
J10
1
Conn_02x06_Odd_Even
J11
2
SolderJumper_2_Bridged
JP1, JP2
2
SolderJumper_2_Open
JP3, JP4
1
SW_Push
SW1

ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL design files

The KiCad project lives in the AtlasFPGA/ESP32-ATLAS repository on GitHub; these links point at the commit this page was built from.

ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL: common questions

What microcontroller does the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL use?

The ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL is built around the ESP32-b, from the ESP32 family.

How big is the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL PCB?

The ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL measures 62.7 × 64 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL?

16 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL design files?

From the AtlasFPGA/ESP32-ATLAS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL design in my own project?

The repository has no license, so all rights stay with AtlasFPGA. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ATLAS RELOCATOR ESP32 DEV KIT V1 FINAL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP32-ATLAS

Similar boards