LDO-Board for-QMX
atoughram·LDO-Board-for-QMX·hardware/Kicad/DIY LDO Board for QMX.kicad_pcb
About the LDO-Board for-QMX
LDO-Board for-QMX is an open source PCB design by atoughram, published on GitHub. It is a 2-layer board measuring 52.1 × 25.1 mm, with 10 components from 9 distinct parts.
Other key parts include the LT1963AEQ. By type, the board carries 3 resistors, 2 connectors, 2 capacitors, 1 IC, 1 fuse and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
LDO Board based on Analog LT1963AEQ for the QRP Labs QMX
This repository contains the design files for a high-performance Low Dropout (LDO) linear regulator circuit board based on the LT1963AEQ. This board is optimized for fast transient response, low noise, and stable power delivery in sensitive electronic applications.
The LT1963A series are low dropout regulators optimized for fast transient response. The device is capable of supplying 1.5A of output current with a dropout voltage of 340mV. Operating quiescent current is 1mA, dropping to less than 1µA in shutdown.

Main components on the LDO-Board for-QMX
LDO-Board for-QMX bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT1963AEQ | TO-263-5_TabPin3 | U2 |
| 1 | 5-20V IN | TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J1 |
| 1 | Conn_01x02_Pin | TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J2 |
| 1 | 2a 63Vdc | CP_EIA-3528-12_Kemet-T_HandSolder | F1 |
| 1 | 20A | TO-277A | D1 |
| 2 | 10uf 50V Low ESR | C_1206_3216Metric | C1, C2 |
| 1 | 2.4K | R_1206_3216Metric | R1 |
| 1 | 4.7K | R_1206_3216Metric | R2 |
| 1 | 20K | PinHeader_1x03_P2.54mm_Vertical | R3 |
LDO-Board for-QMX design files
The KiCad project lives in the atoughram/LDO-Board-for-QMX repository on GitHub; these links point at the commit this page was built from.
LDO-Board for-QMX: common questions
How big is the LDO-Board for-QMX?
The LDO-Board for-QMX measures 52.1 × 25.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LDO-Board for-QMX?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LDO-Board for-QMX design files?
From the atoughram/LDO-Board-for-QMX repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LDO-Board for-QMX design in my own project?
The repository has no license, so all rights stay with atoughram. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k