S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card
atyapkin·S23-16_5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card·S23-16_PCB/S23-16_PCB.kicad_pcb
About the S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card PCB
S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card is an open source PCB design by atyapkin, published on GitHub. It is a 4-layer board measuring 101.6 × 94 mm, with 208 components from 60 distinct parts.
Other key parts include the TLV76718DRVx, HMC980, HMC1040LP3CE, LT3045xMSE and ADMV1014ACCZ. By type, the board carries 131 capacitors, 37 resistors, 13 ICs, 10 test points, 8 connectors and 5 jumpers.
It belongs with the audio designs in this gallery.
From the project
Virginia Tech S23-16 Senior Design Team Repository
All component footprint and 3D models are located here.
Gerber and Drill files are located here and use the following naming conventions:
The BOM is located on our shared drive here.
Note: Prepreg material is arbitrary, consult manufactuer.
Microcontroller code is located here and is written for use on the Arduino platform.
Main components on the S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card
S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card bill of materials (BOM)
208 components, 60 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV76718DRVx | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U1 |
| 1 | HMC980 | LFCSP-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | HMC1040LP3CE | HMC1040LP3CE | U3 |
| 2 | LT3045xMSE | DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm | U4, U5 |
| 1 | ADMV1014ACCZ | ADMV1014ACCZ | U6 |
| 1 | ADMV1013ACCZ | ADMV1013ACCZ | U7 |
| 1 | ADM7150-5 | DFN300X300X80-9N | U8 |
| 1 | ADM7150-3.3 | DFN300X300X80-9N | U9 |
| 1 | VCC6-LAB-122M880000 | VCC6 | U10 |
| 1 | ADF5355 | ADF5355BCPZ | U11 |
| 1 | EP2K1+ | LFCSP-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U12 |
| 1 | HMC1131 | HMC1131LC4TR | U13 |
| 4 | J | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J1, J2, J3, J4 |
| 2 | J | 1092-0xA-14 | J5, J6 |
| 1 | ASP-184330-01 | ASP-184330-01 | J7 |
| 1 | TSW-110-22-F-D | SAMTEC_TSW-110-22-F-D | J8 |
| 5 | Solder | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 2 | SW_Push_Dual | SW_TL6330AF200Q | SW1, SW2 |
| 10 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +2 |
| 1 | BAT54SL | SOT95P237X111-3N | D1 |
Show 40 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLM15AX100SN1D1 | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 2 | 1u | C_0603_1608Metric | C1, C9 |
| 4 | 10p | C_0402_1005Metric | C2, C102, C103, C108 |
| 1 | 2.2u | C_0603_1608Metric | C3 |
| 5 | 4.7u | CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C4, C5, C114, C115, C116 |
| 19 | 0.01u | C_0402_1005Metric | C6, C7, C55, C56, C62, C63, C64, C73 +11 |
| 31 | 100p | C_0402_1005Metric | C8, C19, C24, C25, C26, C27, C32, C33 +23 |
| 1 | 10u | C_0805_2012Metric | C10 |
| 4 | 4.7p | C_0402_1005Metric | C11, C12, C13, C14 |
| 3 | 4.7u | C_0402_1005Metric | C15, C17, C18 |
| 3 | 10n | C_0402_1005Metric | C16, C20, C21 |
| 2 | 10u | CP_EIA-3216-18_Kemet-A | C22, C23 |
| 12 | 0.1u | C_0402_1005Metric | C28, C29, C39, C40, C41, C42, C43, C44 +4 |
| 28 | 10u | C_0402_1005Metric | C30, C31, C46, C47, C48, C49, C50, C51 +20 |
| 4 | 1u | C_0402_1005Metric | C88, C89, C90, C112 |
| 4 | 1n | C_0402_1005Metric | C98, C99, C100, C101 |
| 2 | 100n | C_0402_1005Metric | C105, C107 |
| 1 | 33n | C_0402_1005Metric | C110 |
| 1 | 10p | C_0201_0603Metric | C111 |
| 1 | 6800p | C_0402_1005Metric | C113 |
| 3 | 4.7u | CP_EIA-1608-10_AVX-L_Pad1.25x1.05mm_HandSolder | C129, C130, C131 |
| 7 | 33 | R_0402_1005Metric | R1, R2, R3, R4, R5, R26, R27 |
| 1 | 966k | R_0402_1005Metric | R6 |
| 1 | 160k | R_0402_1005Metric | R7 |
| 2 | 4.7k | R_0402_1005Metric | R8, R35 |
| 2 | 301 | R_0402_1005Metric | R9, R11 |
| 5 | 10k | R_0402_1005Metric | R10, R17, R23, R25, R29 |
| 1 | 667 | R_0402_1005Metric | R12 |
| 2 | 249 | R_0402_1005Metric | R13, R14 |
| 1 | 18.2k | R_0402_1005Metric | R15 |
| 1 | 24.9k | R_0402_1005Metric | R16 |
| 2 | 200k | R_0402_1005Metric | R18, R19 |
| 2 | 50 | R_0402_1005Metric | R20, R32 |
| 3 | 1.1k | R_0402_1005Metric | R21, R28, R33 |
| 1 | 44.2k | R_0402_1005Metric | R22 |
| 1 | 64.9k | R_0402_1005Metric | R24 |
| 2 | 1k | R_0402_1005Metric | R30, R31 |
| 1 | 100 | R_0402_1005Metric | R34 |
| 1 | 68 | R_0402_1005Metric | R36 |
| 1 | 430 | R_0402_1005Metric | R37 |
S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card design files
The KiCad project lives in the atyapkin/S23-16_5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card repository on GitHub; these links point at the commit this page was built from.
S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card: common questions
How big is the S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card PCB?
The S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card measures 101.6 × 94 mm, has 4 copper layers and is 1.5748 mm thick.
How many components are on the S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card?
208 components, from 60 distinct parts. The full bill of materials is listed on this page.
Where can I download the S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card design files?
From the atyapkin/S23-16_5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the S23-16 5G-mmWave-Up-Down-Converter-FPGA-Mezzanine-Card design in my own project?
The repository has no license, so all rights stay with atyapkin. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687