HardLabs

Monitoring board

AUV-IITK·Electrical·monitoring_board/monitoring_board.kicad_pcb

Monitoring board layout, top view — open source AVR/Arduino board by AUV-IITK

About the Monitoring board

Monitoring board is an open source AVR/Arduino PCB design by AUV-IITK, published on GitHub. It is a 2-layer board measuring 397.3 × 217.9 mm, with 97 components from 21 distinct parts.

Its main chip is the Arduino_1pin, from the AVR/Arduino family. By type, the board carries 44 resistors, 39 connectors, 7 diodes, 2 transistors, 2 fuses and 2 switches.

From the project

Contains schematics, PCB designs, simulations and other files related to Electrical subsystem of AUV-IITK

Monitoring board bill of materials (BOM)

97 components, 21 distinct parts.

QtyPartRefs
2
Q_PMOS_GDS
Q1, Q2
11
Conn_01x02
J1, J2, J3, J4, J7, J8, J9, J10 +3
1
Conn_01x05
J5
1
Conn_02x08_Odd_Even
J6
2
Digital
P1, P17
2
Power
P2, P14
4
Analog
P3, P4, P15, P16
2
PWM
P5, P18
2
PWM
P6, P19
2
Communication
P7, P20
12
CONN_01X01
P8, P9, P10, P11, P12, P13, P21, P22 +4
1
WC1602A
DS1
1
30A Polyfuse
F1
1
4A Polyfuse
F2
2
SW_DIP_x01
SW1, SW2
7
LED
D3, D4, D5, D6, D7, D8, D9
22
1K
R1, R2, R13, R15, R17, R19, R21, R23 +14
9
50m
R3, R4, R5, R6, R7, R8, R9, R10 +1
11
24K
R12, R14, R16, R18, R20, R22, R24, R26 +3
1
R
R41
Show 1 more
QtyPartRefs
1
220
R42

Monitoring board design files

The KiCad project lives in the AUV-IITK/Electrical repository on GitHub; these links point at the commit this page was built from.

Monitoring board: common questions

What microcontroller does the Monitoring board use?

The Monitoring board is built around the Arduino_1pin, from the AVR/Arduino family.

How big is the Monitoring board?

The Monitoring board measures 397.3 × 217.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Monitoring board?

97 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Monitoring board design files?

From the AUV-IITK/Electrical repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Monitoring board design in my own project?

The repository has no license, so all rights stay with AUV-IITK. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Monitoring board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Electrical

Similar boards