Feather-NEO-M9N-GPS
averywallis·Feather-NEO-M9N-GPS·Rev2.1/Feather-NEO-M9N-GPS-Rev2.1.kicad_pcb
About the Feather-NEO-M9N-GPS PCB
Feather-NEO-M9N-GPS is an open source PCB design by averywallis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50.8 × 22.9 mm, with 37 components from 24 distinct parts.
Other key parts include the PRTR5V0U2F,115, NEO-M9N and AP2112K-3.3. By type, the board carries 15 resistors, 7 capacitors, 5 diodes, 3 ICs, 3 connectors and 1 antenna.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery, and the repository also holds 3 earlier revisions of it.
From the project
KiCad files for a NEO-M9N GPS Featherwing
Main components on the Feather-NEO-M9N-GPS
Feather-NEO-M9N-GPS bill of materials (BOM)
37 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PRTR5V0U2F,115 | 74LVC1G27GM115 | IC1 |
| 1 | NEO-M9N | NEO-M9N | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ~ | PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | ~ | PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Molex_47346-0001 | J6 |
| 1 | U.FL | UFLRSMT10 | ANT1 |
| 1 | Battery_Cell | BatteryHolder_Seiko_MS621F | BT1 |
| 1 | I2C | SMT-JUMPER_3_2-NC_TRACE_SILK | JP3 |
| 1 | D_Schottky | D_SOD-323F | D1 |
| 1 | RED | LED_0603_1608Metric | D2 |
| 1 | BLUE | LED_0603_1608Metric | D3 |
| 2 | BAT60AE6327HTSA1 | SOD2513X110N | D4, D5 |
| 1 | 27nH | L_0805_2012Metric | L1 |
| 4 | 1uF | C_0603_1608Metric | C1, C2, C4, C7 |
| 1 | 47pF | C_0603_1608Metric | C3 |
| 2 | 10uF | C_0603_1608Metric | C5, C6 |
| 4 | 33 | R_0603_1608Metric | R1, R2, R3, R4 |
| 2 | 27 | R_0603_1608Metric | R5, R6 |
| 1 | 10 | R_0603_1608Metric | R7 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100k | R_0603_1608Metric | R8, R15 |
| 3 | 1k | R_0603_1608Metric | R9, R12, R13 |
| 2 | 2.2k | R_0603_1608Metric | R10, R11 |
| 1 | 10k | R_0603_1608Metric | R14 |
Feather-NEO-M9N-GPS design files
The KiCad project lives in the averywallis/Feather-NEO-M9N-GPS repository on GitHub; these links point at the commit this page was built from.
Feather-NEO-M9N-GPS: common questions
How big is the Feather-NEO-M9N-GPS PCB?
The Feather-NEO-M9N-GPS measures 50.8 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Feather-NEO-M9N-GPS?
37 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Feather-NEO-M9N-GPS design files?
From the averywallis/Feather-NEO-M9N-GPS repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Feather-NEO-M9N-GPS design in my own project?
Yes, under the terms of its GPL-3.0 license, which averywallis chose for the repository.
Earlier revisions in the repo: Feather-NEO-M9N-GPS-Rev2, Feather-NEO-M9N-GPS-Rev1, Feather-NEO-M9N-GPS
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979