HardLabs

Keeboard

avin-c·keeboard·KiCad_Files/keeb-kicad.kicad_pcb

Keeboard PCB layout, top view — open source RP2040/RP2350 board by avin-c

About the Keeboard PCB

Keeboard is an open source RP2040/RP2350 PCB design by avin-c, published on GitHub. It is a 2-layer board measuring 342.5 × 101.5 mm, with 143 components from 7 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 74 switches, 68 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

Custom 65% mechanical keyboard

Main components on the Keeboard

RaspberryPi_Pico

Keeboard bill of materials (BOM)

143 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
3
MX_stab
S1, S2, S3
1
MX_stab
S4
1
MX_stab
S5
68
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +60
1
RotaryEncoder_Switch
SW69
68
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +60

Keeboard design files

The KiCad project lives in the avin-c/keeboard repository on GitHub; these links point at the commit this page was built from.

Keeboard: common questions

What microcontroller does the Keeboard use?

The Keeboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keeboard PCB?

The Keeboard measures 342.5 × 101.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keeboard?

143 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keeboard design files?

From the avin-c/keeboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keeboard design in my own project?

The repository has no license, so all rights stay with avin-c. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keeboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards