HardLabs

E figet pathfinder

Awesome-XV·e-figet-pathfinder

E figet pathfinder PCB layout, top view — open source RP2040/RP2350 board by Awesome-XV

About the E figet pathfinder PCB

E figet pathfinder is an open source RP2040/RP2350 PCB design by Awesome-XV, published on GitHub. It is a 2-layer board measuring 99.6 × 72.3 mm, with 22 components from 6 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 8 diodes, 7 resistors, 4 switches, 2 connectors and 1 IC.

It belongs with the keyboards designs in this gallery.

E figet pathfinder, from the project README
From the project README

Main components on the E figet pathfinder

XIAO-RP2040-DIP

E figet pathfinder bill of materials (BOM)

22 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
2
Conn_01x01_Pin
J1, J2
4
SW_Push
SW1, SW2, SW3, SW4
7
L08R5000Q1
D1, D2, D3, D4, D5, D6, D7
1
1N5817
D8
7
R
R1, R2, R3, R4, R5, R6, R7

E figet pathfinder design files

The KiCad project lives in the Awesome-XV/e-figet-pathfinder repository on GitHub; these links point at the commit this page was built from.

E figet pathfinder: common questions

What microcontroller does the E figet pathfinder use?

The E figet pathfinder is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the E figet pathfinder PCB?

The E figet pathfinder measures 99.6 × 72.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the E figet pathfinder?

22 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the E figet pathfinder design files?

From the Awesome-XV/e-figet-pathfinder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the E figet pathfinder design in my own project?

The repository has no license, so all rights stay with Awesome-XV. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the E figet pathfinder without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards