STM32 CO2 LowPowerSensor
awicek·STM32_CO2_LowPowerSensor·HW/CO2_stm_sensor/CO2_stm_sensor.kicad_pcb
About the STM32 CO2 LowPowerSensor PCB
STM32 CO2 LowPowerSensor is an open source STM32 PCB design by awicek, published on GitHub. It is a 2-layer board measuring 35 × 92 mm, with 67 components from 43 distinct parts.
Its main chip is the SCD41-D-R2, from the STM32 family. Other key parts include the SWITCH_TPS22917DBVR, TPS22917DBVR, P_MOSFET_AO3407A, USBC_16PIN and ESC_PROTECTION_USBLC6-2SC6. By type, the board carries 20 capacitors, 16 resistors, 10 ICs, 8 test points, 4 connectors and 3 diodes.
It belongs with the sensors designs in this gallery.
From the project
STM32 based CO2 low power sensor with logging into a SD card.
Main components on the STM32 CO2 LowPowerSensor
STM32 CO2 LowPowerSensor bill of materials (BOM)
67 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SCD41-D-R2 | SCD41DR2 | IC1 |
| 1 | SWITCH_TPS22917DBVR | SOT95P280X145-6N | IC2 |
| 1 | TPS22917DBVR SWITCH_TPS22917DBVR | SOT95P280X145-6N | IC3 |
| 1 | P_MOSFET_AO3407A | SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | U2 |
| 1 | USBC_16PIN | USB-C-SMD_TYPE-C-6PIN-2MD-073 | U3 |
| 1 | ESC_PROTECTION_USBLC6-2SC6 ESC_Protection_USBLC6-2SC6 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
| 1 | STM32G474RETX STM32G474RETx | LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | C7529389 sd_card_slot | TF-SMD_TF-CARD-H1.8 | U6 |
| 1 | ~ | MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U7 |
| 1 | LDO_TPS7A0228PDBVR | SOT-23-5_L2.9-W1.6-P0.95-LS2.8-BR | U8 |
| 1 | 24MHZ 24MHz | CRYSTAL-SMD_4P-L2.0-W1.6-BL | Y1 |
| 2 | CONN_1X4 Conn_1x4 | CONN-TH_4P-P2.00_S4B-PH-K-S-LF-SN | J1, J2 |
| 2 | CONN_1X6 Conn_1x6 | CONN-TH_6P-P2.00_S6B-PH-K-S-LF-SN | J3, J4 |
| 1 | C7525438 Battery_Cell | BATTERY-SMD_18650-1S-L77.1-W20.7-1 | BT1 |
| 1 | Jumper | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LDO-AMS1117-3.3 | SOT-223-4_L6.5-W3.5-P2.30-LS7.0-BR | LDO1 |
| 1 | C79174 USR_WAKEUP | pushbutton_EVQPUC02K | S1 |
| 1 | C79174 USR_BTN | pushbutton_EVQPUC02K | S2 |
| 8 | TestPoint | PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 3 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C28323 1u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | C377773 2.2u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 2.2u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 8 | 100n F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C8, C11, C14, C15, C19 |
| 1 | C49678 100n F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | C45783 22u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | C15850 10u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | C1679 6.8p F | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | 6.8PF 6.8pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | C1724 200p F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 2 | 1u F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C20 |
| 1 | 200p F | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18 |
| 2 | 5k R | R_0805_2012Metric | R1, R16 |
| 1 | C4328 20K R | R_0805_2012Metric | R2 |
| 1 | C17621 30k R | R_0805_2012Metric | R3 |
| 1 | C17414 10k R | R_0805_2012Metric | R4 |
| 3 | 10k R | R_0805_2012Metric | R5, R12, R13 |
| 1 | C17713 47k R | R_0805_2012Metric | R6 |
| 3 | 47k R | R_0805_2012Metric | R7, R8, R9 |
| 1 | C17710 480 R | R_0805_2012Metric | R10 |
| 1 | 50k R | R_0805_2012Metric | R11 |
| 1 | 480 R | R_0805_2012Metric | R14 |
| 1 | C17673 5k R | R_0805_2012Metric | R15 |
STM32 CO2 LowPowerSensor design files
The KiCad project lives in the awicek/STM32_CO2_LowPowerSensor repository on GitHub; these links point at the commit this page was built from.
STM32 CO2 LowPowerSensor: common questions
What microcontroller does the STM32 CO2 LowPowerSensor use?
The STM32 CO2 LowPowerSensor is built around the SCD41-D-R2, from the STM32 family.
How big is the STM32 CO2 LowPowerSensor PCB?
The STM32 CO2 LowPowerSensor measures 35 × 92 mm, has 2 copper layers and is 1.6062 mm thick.
How many components are on the STM32 CO2 LowPowerSensor?
67 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32 CO2 LowPowerSensor design files?
From the awicek/STM32_CO2_LowPowerSensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32 CO2 LowPowerSensor design in my own project?
The repository has no license, so all rights stay with awicek. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32 CO2 LowPowerSensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k