22 open source boards using the SCD41-D-R2
Real designs built with the SCD41-D-R2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
AirCube
StuckAtPrototype
45 × 45 mm52 parts2LApache-2.0357ESP32
ESPHome-Indoor-Multi-Sensor
mikelawrence
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012ESP32
Esp32-c6-environmental logger
pushtiujeniya
75 × 56.4 mm59 parts4LNo license4ESP32
Kicad duct turbo fan controller
scattym
42.7 × 48.8 mm46 parts2LGPL-3.04- schematic only · 139 partsESP32
GrowHub
Ajakovski
139 partsMIT2 ESP32
CanSat
budabalint
54 × 52 mm439 parts4LNo license0ESP32
Mega2560plus
sneakylizard123-4
53.3 × 101.6 mm138 parts4LNo license0Sensor-HAT
Eniemooo
65 × 56 mm94 parts4LCC-BY-SA-4.00ESP32
Air-Quality-Sensor
Szymon423
70 × 70 mm76 parts2LCC-BY-NC-4.00ESP32
Ummon
JonaWe
60 × 60 mm75 parts4LNo license0ESP32
Wisp
huulanka
60 × 80 mm74 parts4LMIT0STM32
STM32 CO2 LowPowerSensor
awicek
35 × 92 mm67 parts2LNo license0ESP32
AHAQ-1
vactomas
50 × 50 mm58 parts4LNo license0ESP32
Sensor puck
david072
42.2 × 41.9 mm49 parts2LNo license0AirQualityMonitor
Tsquash
109.5 × 79 mm45 parts4LApache-2.00ESP32
Aqproto
HOUXA8
25.5 × 62.8 mm31 parts4LNo license0ESP32
Stencil
mikelawrence
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012ESP32
.Mega2560plus.spinrender src
sneakylizard123-4
53.3 × 101.6 mm137 parts6LNo license0Scd4x companion
philipcristiano
12 × 25 mm3 parts2LNo license0ESP32
.Mega2560plus.spinrender tmp
sneakylizard123-4
53.3 × 101.6 mm137 parts6LNo license0Air
marmbrus
70 × 70 mm39 parts4LNo license0ESP32
Esp32 scd41
HeyPCB
30 × 56 mm24 parts4LCERN-OHL-S-2.00
How designs wire the SCD41-D-R2
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the SCD41-D-R2 connects to, and the resistors, capacitors and other passives placed on it.
- The DNC_1 pin is left unconnected on 18 of 18 designs.
- The DNC_2 pin is left unconnected on 18 of 18 designs.
- The DNC_3 pin is left unconnected on 18 of 18 designs.
- The DNC_4 pin is left unconnected on 18 of 18 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DNC_1pin 1 | Connected to: Not connected 100% | — |
| DNC_2pin 2 | Connected to: Not connected 100% | — |
| DNC_3pin 3 | Connected to: Not connected 100% | — |
| DNC_4pin 4 | Connected to: Not connected 100% | — |
| DNC_5pin 5 | Connected to: Not connected 100% | — |
| GNDpin 6, 20, 21 | Connected to: GND 100% | — |
| VDDpin 7, 19 | Connected to: 3.3V 94% |
|
| DNC_8pin 8 | Connected to: Not connected 100% | — |
| SCLpin 9 | Connected to: The microcontroller 72%, SGP41-D-R4 22%, a connector 22% |
|
| SDApin 10 | Connected to: The microcontroller 72%, SGP41-D-R4 22%, a connector 22% |
|
| DNC_11pin 11 | Connected to: Not connected 100% | — |
| DNC_12pin 12 | Connected to: Not connected 100% | — |
| DNC_13pin 13 | Connected to: Not connected 100% | — |
| DNC_14pin 14 | Connected to: Not connected 100% | — |
| DNC_15pin 15 | Connected to: Not connected 100% | — |
| DNC_16pin 16 | Connected to: Not connected 100% | — |
| DNC_17pin 17 | Connected to: Not connected 100% | — |
| DNC_18pin 18 | Connected to: Not connected 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AirCube by StuckAtPrototype, ESPHome-Indoor-Multi-Sensor by mikelawrence, Esp32-c6-environmental logger by pushtiujeniya and Kicad duct turbo fan controller by scattym.
The SCD41-D-R2 in open source designs
The gallery holds 22 open source boards using the SCD41-D-R2 from 19 GitHub repositories; a typical one measures about 53.3 × 59.7 mm and carries around 71 components.
71% use four copper layers or more, and 41% carry an open source license.
The most starred is AirCube by StuckAtPrototype.
Parts used alongside the SCD41-D-R2
What boards using the SCD41-D-R2 are built for
SCD41-D-R2: common questions
Where can I find a SCD41-D-R2 reference design?
Each of the 22 boards on this page is a real design using the SCD41-D-R2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SCD41-D-R2 DNC_1 pin connected?
The DNC_1 pin is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the SCD41-D-R2.
How is the SCD41-D-R2 DNC_2 pin connected?
The DNC_2 pin is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the SCD41-D-R2.
How is the SCD41-D-R2 DNC_3 pin connected?
The DNC_3 pin is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 18 open source designs using the SCD41-D-R2.
What parts are used alongside the SCD41-D-R2?
The SGP41-D-R4, USBLC6-2SC6, ADS1115IDGS, AP2112K-3.3TRG1 and BME680 appear in the most repositories here.
Which microcontrollers do boards using the SCD41-D-R2 use?
Most are built on ESP32 (17) and STM32 (1).
How big is a typical board using the SCD41-D-R2?
The median is 53.3 × 59.7 mm, and 29% are two-layer designs.
What is the most popular open source board using the SCD41-D-R2?
By GitHub stars, AirCube by StuckAtPrototype, with 357 stars.
Can I simulate one of these boards using the SCD41-D-R2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.