21 open source boards using the TPS22917DBVR

Real designs built with the TPS22917DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

21 boardsClear filters|Most starred

How designs wire the TPS22917DBVR

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the TPS22917DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 18 of 20 designs, most often 1 µF (then 100 nF).
  • The VOUT pin has a capacitor to GND on 14 of 20 designs, most often 100 nF (then 1 µF).
  • The ON pin has a resistor to GND on 8 of 20 designs, most often 100 kΩ (then 1 MΩ).
VINpin 1Connected to: 3.3V 70% · a signal 30%
  • Decoupling capacitor on 90% · 1 µF (14), 100 nF (7), 4.7 µF (2)
  • Capacitor on 40% · 1 nF (5), 200 pF (2), 470 pF (1)
GNDpin 2Connected to: GND 100%
ONpin 3Connected to: The microcontroller 50%
  • Resistor to GND on 40% · 100 kΩ (4), 1 MΩ (3), 10 kΩ (1)
CTpin 4Connected to: Signal 80% · not connected 20%
  • Capacitor to GND on 35% · 1 nF (5), 47 µF (1), 3.3 nF (1)
  • Capacitor to the supply on 35% · 1 nF (5), 470 pF (1), 10 pF (1)
QODpin 5Connected to: Signal 70% · not connected 20%
  • Series resistor on 30% · 100 Ω (2), 0 Ω (2), 1 kΩ (1)
VOUTpin 6Connected to: A connector 30% · 3.3V 40%
  • Capacitor to GND on 70% · 100 nF (9), 1 µF (8), 22 µF (3)
  • Series resistor on 35% · 0 Ω (3), 100 Ω (2), 10 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nrf54 promicro by brendose, SCALES Leviathan V2 by BroncoSpace-Lab, Namecard by soumame and Demo Board by will-fritz.

The TPS22917DBVR in open source designs

The gallery holds 21 open source boards using the TPS22917DBVR from 20 GitHub repositories; a typical one measures about 91 × 64 mm and carries around 92 components.

81% use four copper layers or more, and 48% carry an open source license.

The most starred is Nrf54 promicro by brendose.

Microcontrollers on boards using the TPS22917DBVR

TPS22917DBVR: common questions

Where can I find a TPS22917DBVR reference design?

Each of the 21 boards on this page is a real design using the TPS22917DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS22917DBVR VIN pin?

The VIN pin has a decoupling capacitor on 18 of 20 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 20 open source designs using the TPS22917DBVR.

How is the TPS22917DBVR VOUT pin connected?

The VOUT pin has a capacitor to GND on 14 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the TPS22917DBVR.

What resistor goes on the TPS22917DBVR ON pin?

The ON pin has a resistor to GND on 8 of 20 designs, most often 100 kΩ (then 1 MΩ). Counted from the KiCad layouts of 20 open source designs using the TPS22917DBVR.

What parts are used alongside the TPS22917DBVR?

The USBLC6-2SC6, BQ24074RGTR, BME680, BQ24075RGTR and LV2862XLVDDCR appear in the most repositories here.

Which microcontrollers do boards using the TPS22917DBVR use?

Most are built on Nordic nRF (4), ESP32 (3), STM32 (3) and AVR/Arduino (1).

How big is a typical board using the TPS22917DBVR?

The median is 91 × 64 mm, and 19% are two-layer designs.

What is the most popular open source board using the TPS22917DBVR?

By GitHub stars, Nrf54 promicro by brendose, with 9 stars.

Can I simulate one of these boards using the TPS22917DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part