HardLabs

ASME-task2

Ayush-Malik-07·ASME-task2

This repository ships a schematic but no board layout.

About the ASME-task2 PCB

ASME-task2 is an open source AVR/Arduino PCB design by Ayush-Malik-07, published on GitHub. It is a board, with 36 components from 19 distinct parts.

Its main chip is the ATmega328P-A, from the AVR/Arduino family. Other key parts include the TB6612FNG. By type, the board carries 8 capacitors, 5 connectors, 5 resistors, 3 test points, 2 ICs and 2 modules.

It belongs with the power & battery designs in this gallery.

From the project

Title: Task 2 – KiCad PCB Workflow Project setup

Title: Task 2 – KiCad PCB Workflow Project setup

Opened the project and checked the schematic for all parts and reference designators so they make sense before moving to PCB.

Noted the initial error from PCB update: a lot of components had “no footprint assigned,” so PCB couldn’t add them.

Opened the Assign Footprints tool from the schematic.

For big ICs already had exact packages selected: TPS61022 (VQFN-7 2x2mm P0.5mm), TPS5403 (SOIC‑8 3.9x4.9mm P1.27mm), SSOP‑24, TQFP‑32, and DO‑41 diode.

Main components on the ASME-task2

ATmega328P-ATB6612FNG

ASME-task2 bill of materials (BOM)

36 components, 19 distinct parts.

QtyPartRefs
1
ATmega328P-A
U1
1
TB6612FNG
U2
2
Motor_DC
M1, M2
1
Crystal_GND24
Y1
5
Conn_01x04
J1, J2, J3, J4, J5
1
R0
10kΩ?1
3
C_Polarized_Small
10 µF?1, 10 µF?2, 10 µF?3
1
TPS61022
Boost1
1
TPS5403
Buck1
1
Battery
PWR_FLAG1
3
TestPoint
TP1, TP2, TP3
1
1N5819
D1
2
L
L1, L2
2
10 µF
C1, C2
1
C_Small_US
C3
5
0.1 µF
C4, C5, C6, C7, C8
3
100 kΩ
R1, R4, R5
1
732 kΩ
R2
1
R33
R3

ASME-task2 design files

The KiCad project lives in the Ayush-Malik-07/ASME-task2 repository on GitHub; these links point at the commit this page was built from.

ASME-task2: common questions

What microcontroller does the ASME-task2 use?

The ASME-task2 is built around the ATmega328P-A, from the AVR/Arduino family.

How many components are on the ASME-task2?

36 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the ASME-task2 design files?

From the Ayush-Malik-07/ASME-task2 repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the ASME-task2 design in my own project?

The repository has no license, so all rights stay with Ayush-Malik-07. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ASME-task2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards