TinyLoRa Breakout v1.1
About the TinyLoRa Breakout v1.1
TinyLoRa Breakout v1.1 is an open source PCB design by azerimaker, published on GitHub under the CERN-OHL-S-2.0 license. It is a board measuring 22.9 × 50.8 mm, with 38 components from 32 distinct parts.
Other key parts include the TLM01, TP4054, MAX809STRG, ME6215C33 and NUP2202. By type, the board carries 11 resistors, 8 capacitors, 6 ICs, 5 connectors, 4 diodes and 2 inductors.
It belongs with the dev boards & breakouts and rf & radio designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
________________________________ ## Open Source Hardware This board is an OSHWA approved design: AZ000002
Main components on the TinyLoRa Breakout v1.1
TinyLoRa Breakout v1.1 bill of materials (BOM)
38 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLM01 | TLM-01-footprint_w_paste | U1 |
| 1 | TP4054 | SOT-23-5 | U2 |
| 1 | MAX809STRG | SOT-23 | U3 |
| 1 | ME6215C33 | SOT-23-5 | U4 |
| 1 | NUP2202 | SOT-363_SC-70-6 | U5 |
| 1 | Feather-Generic | Feather-Generic | U6 |
| 1 | SMA-Edge-Mount | SMA_J_P_X_ST_EM1_EdgeMount | J1 |
| 1 | U.FL-R-SMT-1 | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | JST_PH | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | USB_B_Micro | USB_Micro-B_C10418 | J4 |
| 1 | Cortex_JTAG_SWD_10pin | PinHeader_2x05_P1.27mm_Vertical_SMD | J5 |
| 1 | 1A | Fuse_0805_2012Metric | F1 |
| 1 | RESET | SW_Push_SKRPACE010 | SW3 |
| 1 | MBR0520 | D_SOD-123 | D1 |
| 1 | CH_ORANGE | LED_0603_1608Metric | D2 |
| 1 | LED_PWR_BLUE | LED_0603_1608Metric | D4 |
| 1 | LED0_RED | LED_0603_1608Metric | D5 |
| 1 | BLM18HE152SN1D | L_0603_1608Metric | FB1 |
| 1 | 0R | L_0402_1005Metric | L1 |
| 1 | DNM | C_0402_1005Metric | C1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10uF | C_0603_1608Metric | C3, C5 |
| 1 | 1uF | C_0603_1608Metric | C4 |
| 2 | 10nF | C_0603_1608Metric | C6, C8 |
| 2 | 100nF | C_0603_1608Metric | C7, C9 |
| 1 | DNM | R_0402_1005Metric | R1 |
| 1 | 0R | R_0402_1005Metric | R2 |
| 1 | 4K7 | R_0402_1005Metric | R4 |
| 1 | 100K | R_0402_1005Metric | R5 |
| 3 | 1K5 | R_0402_1005Metric | R6, R8, R9 |
| 1 | 100R | R_0402_1005Metric | R7 |
| 2 | 1M | R_0402_1005Metric | R10, R11 |
| 1 | 3M6 | R_0402_1005Metric | R12 |
TinyLoRa Breakout v1.1 design files
The KiCad project lives in the azerimaker/Penguino-SAMR34 repository on GitHub; these links point at the commit this page was built from.
TinyLoRa Breakout v1.1: common questions
How big is the TinyLoRa Breakout v1.1?
The TinyLoRa Breakout v1.1 measures 22.9 × 50.8 mm and is 1.6 mm thick.
How many components are on the TinyLoRa Breakout v1.1?
38 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TinyLoRa Breakout v1.1 design files?
From the azerimaker/Penguino-SAMR34 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the TinyLoRa Breakout v1.1 design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which azerimaker chose for the repository.
More boards in Penguino-SAMR34
Earlier revisions in the repo: TLM-breakout-v1_1, TLM-breakout-v1
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446