45 open source boards using the TP4054

Real designs built with the TP4054, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

45 boardsClear filters|Most starred

How designs wire the TP4054

Read from the KiCad layouts of 44 open source designs, one per repository: what each pin of the TP4054 connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG pin has a resistor to GND on 43 of 44 designs, most often 10 kΩ (then 2 kΩ).
  • The STAT pin has a series resistor on 21 of 44 designs, most often 1 kΩ (then 100 kΩ).
  • The VDD pin has a decoupling capacitor on 19 of 44 designs, most often 10 µF (then 1 µF).
  • The VBAT pin has a decoupling capacitor on 18 of 44 designs, most often 10 µF (then 1 µF).
STATpin 1Connected to: Signal 93%
  • Series resistor on 48% · 1 kΩ (12), 100 kΩ (2), 10 kΩ (2)
VSSpin 2Connected to: GND 100%
VBATpin 3Connected to: BATT 82% · a signal 18%
  • Decoupling capacitor on 41% · 10 µF (11), 1 µF (2), 4.7 µF (2)
VDDpin 4Connected to: VBUS 84% · a signal 16%
  • Decoupling capacitor on 43% · 10 µF (7), 1 µF (7), 4.7 µF (2)
PROGpin 5Connected to: Signal 100%
  • Resistor to GND on 98% · 10 kΩ (16), 2 kΩ (4), 5.1 kΩ (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include WABBLE-60 by rgoulter, Watchy hardware by sqfmi, Smartdisplay hardware by BearLaboratory and Tmy by schlae.

The TP4054 in open source designs

The gallery holds 45 open source boards using the TP4054 from 45 GitHub repositories; a typical one measures about 72.2 × 54.5 mm and carries around 62 components.

79% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is WABBLE-60 by rgoulter.

Microcontrollers on boards using the TP4054

TP4054: common questions

Where can I find a TP4054 reference design?

Each of the 45 boards on this page is a real design using the TP4054. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TP4054 PROG pin?

The PROG pin has a resistor to GND on 43 of 44 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 44 open source designs using the TP4054.

What resistor goes on the TP4054 STAT pin?

The STAT pin has a series resistor on 21 of 44 designs, most often 1 kΩ (then 100 kΩ). Counted from the KiCad layouts of 44 open source designs using the TP4054.

What decoupling capacitors do designs use on the TP4054 VDD pin?

The VDD pin has a decoupling capacitor on 19 of 44 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 44 open source designs using the TP4054.

What parts are used alongside the TP4054?

The AP2112K-3.3, E73-2G4M08S1C, USBLC6-2P6, BMA423 and ME6211C33M5G-N appear in the most repositories here.

Which microcontrollers do boards using the TP4054 use?

Most are built on ESP32 (15), Nordic nRF (6), RP2040/RP2350 (3) and STM32 (2).

How big is a typical board using the TP4054?

The median is 72.2 × 54.5 mm, and 79% are two-layer designs.

What is the most popular open source board using the TP4054?

By GitHub stars, WABBLE-60 by rgoulter, with 230 stars.

Can I simulate one of these boards using the TP4054 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part