Ria
B44ken·ria·pcb/ria.kicad_pcb
About the Ria PCB
Ria is an open source PCB design by B44ken, published on GitHub. It is a 4-layer board measuring 50 × 69.5 mm, with 63 components from 53 distinct parts.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
ria is a small wheeled biped built for jumping and fast ground motion.
ria is a small wheeled biped built for jumping and fast ground motion.
- 2x 5010 260kv bldc - 2x gbm2804 145kv bldc - 2x sg90 servo - control pcb: 4x ss6343m, doit esps3-32-n4, tokmas icm-42688-p, ap63301 - 4x as5600 - funfly 1300 4s lipo - m2, m3 screws - 6x 693zz bearings (planet gears) - 2x gt3 300 mm closed belt
- 10:1 two stage knee transmission - 100mm upper and lower legs - 720g mass - 150g/side motors, 200g plastic, 150g battery, 70g everything else - 20cm jump height, 30kmh top speed (tentative, accurate-ish)

Ria bill of materials (BOM)
63 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PZ254V-11-04P XFCN | ENC-J1 | ENC-J1 |
| 1 | PZ254V-11-04P XFCN | ENC-J2 | ENC-J2 |
| 1 | PZ254V-11-04P XFCN | ENC-J3 | ENC-J3 |
| 1 | PZ254V-11-04P XFCN | ENC-J4 | ENC-J4 |
| 1 | 4.7kΩ | ENC-RC0 | ENC-RC0 |
| 1 | 4.7kΩ | ENC-RC1 | ENC-RC1 |
| 1 | 4.7kΩ | ENC-RC2 | ENC-RC2 |
| 1 | 4.7kΩ | ENC-RC3 | ENC-RC3 |
| 1 | 4.7kΩ | ENC-RD0 | ENC-RD0 |
| 1 | 4.7kΩ | ENC-RD1 | ENC-RD1 |
| 1 | 4.7kΩ | ENC-RD2 | ENC-RD2 |
| 1 | 4.7kΩ | ENC-RD3 | ENC-RD3 |
| 1 | 10uF | ESP-C1 | ESP-C1 |
| 5 | CL21B105KBFNNNE 1uF Samsung Electro-Mechanics | C_0805_2012Metric | ESP-C3, MOTOR1-C2, MOTOR2-C2, MOTOR3-C2, MOTOR4-C2 |
| 1 | 10kΩ | ESP-R1 | ESP-R1 |
| 1 | 10kΩ | ESP-R2 | ESP-R2 |
| 1 | 22Ω | ESP-R3 | ESP-R3 |
| 1 | 22Ω | ESP-R4 | ESP-R4 |
| 1 | TS-1088-AR02016 ESP-SW1 | ESP-SW1 | ESP-SW1 |
| 1 | TS-1088-AR02016 ESP-SW2 | ESP-SW2 | ESP-SW2 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESPS3-32-N4 DOIT | ESP-U1 | ESP-U1 |
| 1 | 100nF | IMU-C1 | IMU-C1 |
| 1 | 100nF | IMU-C2 | IMU-C2 |
| 1 | ICM-42688-P(TOKMAS) | IMU-U1 | IMU-U1 |
| 1 | 100nF | MOTOR1-C3 | MOTOR1-C3 |
| 4 | CL31A226KAHNNNE 22uF Samsung Electro-Mechanics | C_1206_3216Metric | MOTOR1-C5, MOTOR2-C5, MOTOR3-C5, MOTOR4-C5 |
| 1 | CL10A475KO8NNNC 4.7uF | MOTOR1-C6 | MOTOR1-C6 |
| 4 | SS6343M-QF-TP | SS6343M-QF-TP | MOTOR1-U1, MOTOR2-U1, MOTOR3-U1, MOTOR4-U1 |
| 1 | 100nF | MOTOR2-C3 | MOTOR2-C3 |
| 1 | CL10A475KO8NNNC 4.7uF | MOTOR2-C6 | MOTOR2-C6 |
| 1 | 100nF | MOTOR3-C3 | MOTOR3-C3 |
| 1 | CL10A475KO8NNNC 4.7uF | MOTOR3-C6 | MOTOR3-C6 |
| 1 | 100nF | MOTOR4-C3 | MOTOR4-C3 |
| 1 | CL10A475KO8NNNC 4.7uF | MOTOR4-C6 | MOTOR4-C6 |
| 1 | PZ254V-11-03P XFCN | MOTOR-J1 | MOTOR-J1 |
| 1 | PZ254V-11-03P XFCN | MOTOR-J2 | MOTOR-J2 |
| 1 | 10kΩ | MOTOR-RE | MOTOR-R1 |
| 1 | 10kΩ | MOTOR-RS | MOTOR-R2 |
| 1 | 22uF | POWER-C1 | POWER-C1 |
| 1 | 100nF | POWER-C3 | POWER-C3 |
| 1 | 22uF | POWER-C4 | POWER-C4 |
| 1 | 22uF | POWER-C5 | POWER-C5 |
| 1 | SS34 | POWER-D1 | POWER-D1 |
| 1 | SS34 | POWER-D2 | POWER-D2 |
| 1 | XT60PB-M.G.Y AMASS | POWER-J1 | POWER-J1 |
| 1 | FNR5040S4R7MT 4.7µH | POWER-L1 | POWER-L1 |
| 1 | 75kΩ | POWER-R1 | POWER-R1 |
| 1 | 24kΩ | POWER-R2 | POWER-R2 |
| 1 | AP63301WU-7 Diodes Incorporated | POWER-U1 | POWER-U1 |
| 1 | TYPE-C-31-M-12 | USB-J1 | USB-J1 |
| 1 | 5.1kΩ | USB-RCC1 | USB-RCC1 |
| 1 | 5.1kΩ | USB-RCC2 | USB-RCC2 |
| 1 | USBLC6-2SC6 | USB-U2 | USB-U2 |
Ria design files
The KiCad project lives in the B44ken/ria repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/ria.kicad_pcb
- Schematicpcb/ria.kicad_sch
- BOMbuild/gerber/jlc-bom.csv
Ria: common questions
How big is the Ria PCB?
The Ria measures 50 × 69.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ria?
63 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ria design files?
From the B44ken/ria repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ria design in my own project?
The repository has no license, so all rights stay with B44ken. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k