ElectronyConstructor
BaktiyarBr·ElectronyConstructor·CosmosBoard/CosmosBoard.kicad_pcb
About the ElectronyConstructor PCB
ElectronyConstructor is an open source STM32 PCB design by BaktiyarBr, published on GitHub. It is a 4-layer board measuring 203.2 × 100.1 mm, with 123 components from 39 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the BNO055, AMS1117-3.3, BMP280 and E32-915T30S. By type, the board carries 37 capacitors, 27 resistors, 21 connectors, 11 diodes, 10 switches and 7 ICs.
Main components on the ElectronyConstructor
ElectronyConstructor bill of materials (BOM)
123 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | BNO055 | LGA-28_5.2x3.8mm_P0.5mm | U2 |
| 3 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3, U6, U7 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | E32-915T30S | XCVR_E22-900T30S | U5 |
| 4 | Motor_Servo | PinHeader_1x03_P2.54mm_Vertical | M1, M2, M3, M4 |
| 1 | 8MHz 10ppm (X50328MSB2GI) | Crystal_SMD_5032-2Pin_5.0x3.2mm | X1 |
| 2 | 32.768 | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1, Y2 |
| 1 | USB_B_Micro | USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |
| 1 | power_jumper | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 2 | Conn_01x25 | PinHeader_1x25_P2.54mm_Vertical | J4, J12 |
| 5 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7, J8, J20 |
| 2 | Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J9, J13 |
| 3 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J10, J16, J19 |
| 2 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J11, J15 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J14 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J17, J18 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J21 |
| 1 | SWD | PinHeader_1x05_P2.54mm_Vertical | P1 |
| 3 | R_Potentiometer | Potentiometer_TT_P0915N | RV1, RV2, RV3 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 4 | SW_Push | SW_PUSH-12mm | SW3, SW4, SW5, SW6 |
| 4 | SW_Push_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW8, SW9, SW10, SW11 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 7 | BLU | LED_0603_1608Metric | D2, D3, D4, D5, D6, D10, D11 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D7, D8, D9 |
| 2 | 24p | C_0603_1608Metric | C1, C2 |
| 2 | 15p | C_0603_1608Metric | C3, C4 |
| 8 | 100n | C_0603_1608Metric | C5, C20, C21, C22, C26, C27, C28, C29 |
| 18 | 2.2u | C_0603_1608Metric | C6, C7, C8, C9, C10, C11, C12, C13 +10 |
| 2 | 22p | C_0603_1608Metric | C15, C16 |
| 2 | 100n | C_0402_1005Metric | C23, C24 |
| 3 | 10n | C_0603_1608Metric | C31, C32, C33 |
| 13 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R8, R10, R11, R17, R18, R20 +5 |
| 3 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R13, R14 |
| 2 | 47 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 7 | 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R12, R15, R16, R19, R26, R27 |
| 2 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R9 |
ElectronyConstructor design files
The KiCad project lives in the BaktiyarBr/ElectronyConstructor repository on GitHub; these links point at the commit this page was built from.
ElectronyConstructor: common questions
What microcontroller does the ElectronyConstructor use?
The ElectronyConstructor is built around the STM32F405RGT6, from the STM32 family.
How big is the ElectronyConstructor PCB?
The ElectronyConstructor measures 203.2 × 100.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ElectronyConstructor?
123 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the ElectronyConstructor design files?
From the BaktiyarBr/ElectronyConstructor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ElectronyConstructor design in my own project?
The repository has no license, so all rights stay with BaktiyarBr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ElectronyConstructor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k