STM32H7-HighSpeed-Dev-Board
Balamanikandan-projects·STM32H7-HighSpeed-Dev-Board
About the STM32H7-HighSpeed-Dev-Board
STM32H7-HighSpeed-Dev-Board is an open source STM32 PCB design by Balamanikandan-projects, published on GitHub. It is a 4-layer board measuring 56.5 × 42 mm, with 36 components from 23 distinct parts.
Its main chip is the STM32H743VIT6TR, from the STM32 family. Other key parts include the USBLC6-2SC6 and TLV62569DBVR. By type, the board carries 18 capacitors, 3 ICs, 3 connectors, 3 resistors, 2 inductors and 1 crystal.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
From the project
A 4-layer, interview-ready development board featuring the STM32H743VIT6, optimized for signal integrity and power isolation.
The schematic is organized into strict, modular functional blocks to ensure clean system readability: 1. Power Supply & Input: Raw 5V input via USB-C routed directly through ESD clamping protection into the synchronous buck regulator loop. 2. Core Processor: Centralized STM32H7 MCU hub surrounded closely by dedicated decoupling capacitor networks. 3. Peripheral Storage: High-speed data links mapped to the MicroSD interface.
Main components on the STM32H7-HighSpeed-Dev-Board
STM32H7-HighSpeed-Dev-Board bill of materials (BOM)
36 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | TLV62569DBVR | SOT-23-5 | U2 |
| 1 | STM32H743VIT6TR | LQFP-100-1EP_14x14mm_P0.5mm_EP6.9x6.9mm | U3 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Micro_SD_Card | microSD_HC_Molex_47219-2001 | J3 |
| 1 | Crystal_GND23 | Crystal_SMD_3225-4Pin_3.2x2.5mm | 25MHz1 |
| 1 | 10uF | C_0603_1608Metric | C_in1 |
| 2 | 22uF | C_0603_1608Metric | C_out_1, C_out_2 |
| 1 | 22ohm | R_0603_1608Metric | R_Damp1 |
| 1 | SW_MEC_5G | SW_MEC_5GSH9 | SW1 |
| 1 | FerriteBead | R_0603_1608Metric | FB1 |
| 1 | 1.5uH | L_Wuerth_MAPI-3012 | L1 |
| 2 | 12pF | C_0603_1608Metric | C1, C2 |
| 2 | 10pF | C_0603_1608Metric | C3, C4 |
| 8 | 100nF | C_0603_1608Metric | C5, C6, C7, C9, C10, C11, C12, C13 |
| 1 | 10uF | C_0603_1608Metric | C8 |
| 2 | 4.7uf | C_0603_1608Metric | C14, C15 |
| 2 | 2.2uF | C_0603_1608Metric | C16, C17 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10nF | C_0603_1608Metric | C18 |
| 2 | 5.1K | R_0603_1608Metric | R1, R2 |
| 1 | 10K | R_0603_1608Metric | R3 |
STM32H7-HighSpeed-Dev-Board design files
The KiCad project lives in the Balamanikandan-projects/STM32H7-HighSpeed-Dev-Board repository on GitHub; these links point at the commit this page was built from.
STM32H7-HighSpeed-Dev-Board: common questions
What microcontroller does the STM32H7-HighSpeed-Dev-Board use?
The STM32H7-HighSpeed-Dev-Board is built around the STM32H743VIT6TR, from the STM32 family.
How big is the STM32H7-HighSpeed-Dev-Board?
The STM32H7-HighSpeed-Dev-Board measures 56.5 × 42 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the STM32H7-HighSpeed-Dev-Board?
36 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32H7-HighSpeed-Dev-Board design files?
From the Balamanikandan-projects/STM32H7-HighSpeed-Dev-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32H7-HighSpeed-Dev-Board design in my own project?
The repository has no license, so all rights stay with Balamanikandan-projects. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32H7-HighSpeed-Dev-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k