Usonic

baloghr·usonic·hardware/kicad/gp2026.kicad_pcb

Usonic PCB layout, top view — open source AVR/Arduino board by baloghr

About the Usonic PCB

Usonic is an open source AVR/Arduino PCB design by baloghr, published on GitHub under the Custom license license. It is a 2-layer board measuring 57 × 49.7 mm, with 14 components from 10 distinct parts.

Its main chip is the Arduino_Nano, from the AVR/Arduino family. Other key parts include the TSR1-2450E. By type, the board carries 4 diodes, 3 resistors, 2 ICs, 2 crystals, 1 buzzer and 1 jumper.

From the project

KiCad 9 project gp2026 (hardware revision 1.01): schematic, PCB, custom footprints (Library.pretty) and 3D models (packages3D).

KiCad 9 project gp2026 (hardware revision 1.01): schematic, PCB, custom footprints (Library.pretty) and 3D models (packages3D).

- Open gp2026.kicadpro in KiCad 9. - Board size 57.0 × 49.7 mm, two layers, all through-hole. - Fabrication files (Gerber, drill, positions) are not stored in the repository; generate them with File → Fabrication Outputs or the Fabrication Toolkit add-on. The plugin settings are in fabrication-toolkit-options.json`. - The vendor 3D model of the TRACO converter is not included; get it from the manufacturer's website if you want it in the 3D view.

Main components on the Usonic

Usonic bill of materials (BOM)

14 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Nano
U1
1
TSR1-2450E
U2
1
Screw_Terminal_01x02
X1
1
Conn_01x05
X2
1
Buzzer
BZ1
1
Jumper_2_Small_Bridged
JP1
1
Conn_01x05
US1
3
LED
D1, D2, D3
1
1N4007
D4
3
330
R1, R2, R3

Usonic design files

The KiCad project lives in the baloghr/usonic repository on GitHub; these links point at the commit this page was built from.

Usonic: common questions

What microcontroller does the Usonic use?

The Usonic is built around the Arduino_Nano, from the AVR/Arduino family.

How big is the Usonic PCB?

The Usonic measures 57 × 49.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usonic?

14 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Usonic design files?

From the baloghr/usonic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Usonic design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Usonic without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards