5 open source boards using the TSR1-2450E
Real designs built with the TSR1-2450E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Vswr meter
F6ITU
65 × 70 mm64 parts4LNo license3AVR/Arduino
Usonic
baloghr
57 × 49.7 mm14 parts2LCustom license1ESP32
PSO Bridge
0goki
115 × 80 mm166 parts2LMIT0AVR/Arduino
Samro Bedienbox
al3c00
124 × 47 mm92 parts2LNo license0ESP32
UniBoard-Xiao
Unimakers
80 × 80 mm36 parts2LNo license0
How designs wire the TSR1-2450E
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TSR1-2450E connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 22 µF).
- The VOUT pin has a decoupling capacitor on 2 of 5 designs, most often 1 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: Signal 60% · 12V 40% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VOUTpin 3 | Connected to: 5V 60% · a signal 40% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vswr meter by F6ITU, Usonic by baloghr, PSO Bridge by 0goki and Samro Bedienbox by al3c00.
The TSR1-2450E in open source designs
The gallery holds 5 open source boards using the TSR1-2450E from 5 GitHub repositories; a typical one measures about 80 × 70 mm and carries around 64 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Vswr meter by F6ITU.
Microcontrollers on boards using the TSR1-2450E
TSR1-2450E: common questions
Where can I find a TSR1-2450E reference design?
Each of the 5 boards on this page is a real design using the TSR1-2450E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TSR1-2450E VIN pin connected?
The VIN pin has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the TSR1-2450E.
What decoupling capacitors do designs use on the TSR1-2450E VOUT pin?
The VOUT pin has a decoupling capacitor on 2 of 5 designs, most often 1 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the TSR1-2450E.
Which microcontrollers do boards using the TSR1-2450E use?
Most are built on AVR/Arduino (2), ESP32 (2) and NXP (1).
How big is a typical board using the TSR1-2450E?
The median is 80 × 70 mm, and 80% are two-layer designs.
What is the most popular open source board using the TSR1-2450E?
By GitHub stars, Vswr meter by F6ITU, with 3 stars.
Can I simulate one of these boards using the TSR1-2450E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.