MainBoard V3 2
banbatakumi·AutonomousCar·Circuit/MainBoard_V3_2/MainBoard_V3_2.kicad_pcb
About the MainBoard V3 2 PCB
MainBoard V3 2 is an open source STM32 PCB design by banbatakumi, published on GitHub. It is a 2-layer board measuring 56 × 65 mm, with 145 components from 38 distinct parts.
Its main chip is the STM32F446RETX, from the STM32 family. Other key parts include the LM1117MP-3.3, MPU-6050 and INA180A2. By type, the board carries 45 resistors, 37 capacitors, 19 diodes, 15 connectors, 10 transistors and 5 ICs.
Main components on the MainBoard V3 2
MainBoard V3 2 bill of materials (BOM)
145 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETX STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | MPU-6050 | QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm | U3 |
| 2 | INA180A2 | SOT-23-5 | U4, U5 |
| 2 | Q_PMOS_GDS | TO-252-2 | Q1, Q2 |
| 7 | BSS138 | SOT-23 | Q3, Q5, Q6, Q7, Q8, Q9, Q10 |
| 1 | IRLML6402 | SOT-23 | Q4 |
| 1 | CSTNE16M0V530000R0 | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 3 | CONN_01X02 Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1, J2, J3 |
| 3 | CONN_01X04 Conn_01x04 | JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J4, J12, J13 |
| 3 | CONN_01X02 Conn_01x02 | Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal | J5, J6, J7 |
| 1 | CONN_01X07 Conn_01x07 | JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal | J8 |
| 1 | RASPBERRY_PI_2_3 Raspberry_Pi_2_3 | raspberreyPi | J9 |
| 2 | CONN_01X03 Conn_01x03 | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J10, J11 |
| 2 | CONN_01X04 Conn_01x04 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J14, J15 |
| 1 | Buzzer | Buzzer_Murata_PKLCS1212E | BZ1 |
| 2 | Fuse | Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_Horizontal | F1, F2 |
| 1 | OKL-T/6-W12N-C OKL-T_6-W12N-C | MURATA_OKL-T-6-W12N-C_0 | MD1 |
| 3 | SW_Push | SW_SPST_PTS810 | SW1, SW2, SW3 |
| 2 | SW_Slide_DPDT | IS-2235 | SW4, SW5 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TestPoint | TestPoint_THTPad_D4.0mm_Drill2.0mm | TP1, TP2, TP3, TP4 |
| 5 | D_Schottky | D_SOD-323_HandSoldering | D1, D2, D3, D7, D8 |
| 10 | LED | LED_0603_1608Metric | D4, D5, D6, D9, D10, D11, D12, D13 +2 |
| 1 | CH213K | TSOT-23 | D14 |
| 2 | SMAJ13A | D_SMA | D17, D18 |
| 1 | SMAJ5.0A | D_SMA | D19 |
| 12 | 0.1UF 0.1uf | C_0603_1608Metric | C1, C5, C12, C13, C14, C20, C21, C22 +4 |
| 18 | 10U 10u | C_0805_2012Metric | C2, C3, C4, C6, C7, C8, C9, C11 +10 |
| 3 | 100UF 100uf | CP_Radial_D6.3mm_P2.50mm | C10, C28, C29 |
| 1 | 4.7U 4.7u | C_0805_2012Metric | C16 |
| 1 | 2200PF 2200pf | C_0603_1608Metric | C25 |
| 2 | 1UF 1uf | C_0603_1608Metric | C33, C34 |
| 22 | 10K 10k | R_0603_1608Metric | R1, R2, R4, R5, R6, R7, R13, R15 +14 |
| 1 | 10M 10m | R_1206_3216Metric | R3 |
| 12 | 1k | R_0603_1608Metric | R8, R11, R14, R16, R18, R20, R22, R23 +4 |
| 1 | 330 | R_0603_1608Metric | R9 |
| 8 | 10 | R_0603_1608Metric | R10, R12, R21, R29, R31, R33, R35, R41 |
| 1 | 5m | R_1206_3216Metric | R28 |
MainBoard V3 2 design files
The KiCad project lives in the banbatakumi/AutonomousCar repository on GitHub; these links point at the commit this page was built from.
MainBoard V3 2: common questions
What microcontroller does the MainBoard V3 2 use?
The MainBoard V3 2 is built around the STM32F446RETX, from the STM32 family.
How big is the MainBoard V3 2 PCB?
The MainBoard V3 2 measures 56 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MainBoard V3 2?
145 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MainBoard V3 2 design files?
From the banbatakumi/AutonomousCar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MainBoard V3 2 design in my own project?
The repository has no license, so all rights stay with banbatakumi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MainBoard V3 2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in AutonomousCar
Earlier revisions in the repo: MainBoard_V3, MainBoard_V2, MainBoard_V1
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k