V-TRAD

Barkhausen-Institut·V-TRAD·hardware/car_pi_hat.kicad_pcb

V-TRAD PCB layout, top view — open source board by Barkhausen-Institut

About the V-TRAD PCB

V-TRAD is an open source PCB design by Barkhausen-Institut, published on GitHub. It is a 2-layer board measuring 65 × 30 mm, with 12 components from 11 distinct parts.

Other key parts include the DRV8871DDA. By type, the board carries 6 connectors, 2 switches, 2 capacitors, 1 IC and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

All code and material supporting the paper "V-TRAD: A Visually-Augmented Testbed for Research in Autonomous Driving" submitted to the short paper track of the Mensch und Computer 2025

This folder contains the KICAD project to build the custom PCB mounted on the Raspberry Pis

The components needed to populate the PCB are listed in the BOM.csv

Additionally a 5V DC/DC converter and a Hall Encoder are needed. We choose the TLE4946-2L for the Hall Encoder and the Pololu S13V20F5 for the 5V regulator.

To connect the battery to the board, the original battery connector can be reused and soldered to the pads "GND" and "VBat".

V-TRAD, from the project README
From the project README

Main components on the V-TRAD

V-TRAD bill of materials (BOM)

12 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DRV8871DDA
U2
1
CONN_02X20_ODD_EVEN
GPIO
J1
2
CONN_01X03_MALE
Conn_01x03_Male
J2, J3
1
CONN_01X02_FEMALE
Conn_01x02_Female
J4
1
CONN_01X03_FEMALE
Conn_01x03_Female
J5
1
CONN_01X02_FEMALE
Conn_01x02_Female
J7
1
SW_Push
SW1
1
SW_DIP_X05
SW_DIP_x05
SW2
1
0.1UF
0.1uF
C2
1
22UF
22uF
C3
1
30K
R4

V-TRAD design files

The KiCad project lives in the Barkhausen-Institut/V-TRAD repository on GitHub; these links point at the commit this page was built from.

V-TRAD: common questions

How big is the V-TRAD PCB?

The V-TRAD measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V-TRAD?

12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V-TRAD design files?

From the Barkhausen-Institut/V-TRAD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the V-TRAD design in my own project?

The repository has no license, so all rights stay with Barkhausen-Institut. Use it as a reference, and ask the author before reusing the design.

Similar boards